Jump to content
SAU Community

Recommended Posts

Hi everyone,

I'm reluctantly selling my immaculate black R32 GTS-t coupe. It pulls consistent 535rwhp runs on 24psi on pump fuel - upgrade the fuel system and take the power to the next level! Will run easy 10 second 1/4 mile passes with traction, vehicle is an extremely quick streeter that is maintained regularly and looked after very well. Engine has only about 8000k's on it (if that) and never misses a beat.

Details/mods are as follows:

CAR: 1993 R32 GTS-t Skyline

ENGINE: SERIES 2 RB25DET

ENGINE MODS:

Step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift

Type B Tomei valve springs

Ported head

Tomei cam gears

Tomei 1.8mm metal headgasket

870cc Siemens top feed injectors

Custom fuel rail

Greddy plenum

Q45 80mm throttle body

ACL forged pistons & rings (20thou over)

RB26 Tomei I'Beam rods

ACL Race main & big end bearings

N1 oil pump

Custom sump & pick-up (holds 9 litres of oil)

Remote oil filter set-up

Braided lines for oil cooler

Bosch HEC715 coils with MSD leads

Malpassi Race adjustable regulator

Bosch 044 intank fuel pump

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings

Turbosmart Ultragate wastegate with screamer

Stainless exhaust manifold

Custom 3 inch mandrel dump into 3 inch cat into 4 inch mandrel exhaust & 4 inch muffler with 5 inch tip

Drift air filter

Microtech LT12S ECU

Microtech X6 ignition box

Turbosmart eBoost2

R33 power steering pump & reservoir

DRIVELINE:

Lightened alloy flywheel

Heavy-duty button clutch

Custom 1-piece tailshaft

BRAKES:

DBA 4000 front slotted rotors

Standard rears

SUSPENSION:

Tein Super Street fully adjustable coil-overs (1 year old – hardly used)

R32 GT-R complete rear cradle

R32 GT-R 2-way mechanical diff

INTERIOR:

Autometer Ultralite boost (30psi), Air/Fuel meter (stoich) & oil pressure gauges in custom polished alloy mount

eBoost2 gauge

MoMo Race steering wheel

EXTERIOR:

GTR side skirts & rear pods

ROH Drift R rims

225/40 tyres on front

275/35 tyres on rear

The car was featured in Zoom magazine and is immaculate inside and out (including good paint) with nothing to spend (absolutely nothing wrong with it). I'll miss this weapon when it's gone ;) but it's time to fund a new project :O

Please give me a call on 0409 304 104 or Trent on 0402 421 437 for further details (strictly no time wasters!! Serious enquiries only)

Will consider offers and swap with cash my way.

Tess :bunny:

post-43305-1262488745_thumb.jpg

post-43305-1262488823_thumb.jpg

post-43305-1262488864_thumb.jpg

post-43305-1262488887_thumb.jpg

post-43305-1262488915_thumb.jpg

post-43305-1262488953_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/302276-535rwhp-r32-gts-t-built-rb25/
Share on other sites

  • 2 months later...

PRICE DROP TO $20999 - SWAPS NO LONGER CONSIDERED

Need it sold - first to inspect will buy, it is absolutely mint as was only just shot for HPI magazine a couple of weeks ago.

Awesome R32 and one of the finest examples out there plus one of the most powerful straight RB25's in Oz on pump fuel...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...