Jump to content
SAU Community

Fs: A31 Nismo Strut Brace

D4NM4C
 Share

Recommended Posts

Nic_A31 Grand Master

Nic_A31

Posted
Posted

How does it not fit your S13?

A31 strut towers are the same as S13 (formation the the top, distance from one tower to other)....the only difference is the A31 has less height clearance, so in all cases, A31 braces will fit S13, since most S13 braces fit the A31 depending on how high up they come.

Sure it's not for something else ?

D4NM4C Rookie

D4NM4C

Posted
  • Author
Posted
How does it not fit your S13?

A31 strut towers are the same as S13 (formation the the top, distance from one tower to other)....the only difference is the A31 has less height clearance, so in all cases, A31 braces will fit S13, since most S13 braces fit the A31 depending on how high up they come.

Sure it's not for something else ?

The distance between the strut towers is fine and so is the clearance for the engine, the issue is the firewall is closer on the S13 and hence the BMC sits next to the strut tower, whereas in an A31 it's placed further back

D4NM4C Rookie

D4NM4C

Posted
  • Author
Posted
Did you try putting the strut brace on the other way, so the bar would be on the other side of the struts?

Also, what is your location?

Yes, putting it the reverse way the bonnet doesn't close

I'm in the ACT

  • 3 weeks later...
RBceffy25 Rising Star

RBceffy25

Posted
Posted

As far as my own personal research has shown, cefiro front strut barce an sway bar are unique and will only fit cefiro.

For strut brace i use UltraRacing and for sway bar Selby.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...