Jump to content
SAU Community

Internet In Narre Warren


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

INASNT I live in Berwick and have IINET ADSL 512kbit, 20gig per month for $79.95 per month (not bad at all, good pings as well)

My mate lives in Narre Warren Sth and has Internode 1500mbit unlimited and swears by it, he used to work for Connect in melbourne and knows his sh%t, Senior Tech. He reckons the network is heaps better as well.

A few estates around this area have Optarse cable but not many

optarse is ghey... internode's alright but dart is the bomb.

That house looks exactly like one that my mate lives in (down tot he bar n billiards table) in Dingley Village. I'm guessing it was a predesigned style or sumfin?

  • 4 weeks later...

anything except an NB1300 or NB1200, stick to D-Link for most things like filters etc, or if you can get your hands on an ASUS hub/modem.

At 512 you won't notice any difference in the equipment you use, only if you start goin to higher speeds. (I've got 512 and tried about 4 different modems with and without routers)

Stick with D-Link, good price for a decent enough product. Something like a DSL-504 $254.17 (if you've got multiple computers) or a DSL-200 $132.09 for a single connection. Check www.instantit.com.au.

Any type of filter is fine, as long as it's for ADSL. InstantIT is quoting $14.00 for a filter, I'm sure I got them cheaper than that...

I'll have to put in a plug for Internode as well... They've got great service, excellent network speed/pings albeit for a couple of dollars extra than the cheapest of providers (you do get what you pay for in the broadband arena). There must be an echo in here (Whirlpool is your friend!) - they just completed their survey too which gives a pretty good breakdown of the current broadband scene.

not necessarily some larger ISP have boxes at exchanges in metro areas and use this. There's even an ISP in rural adelaide offering ADSL where testra don't by setting up secondhand US boxes (since the US has a shiteload of ADSL and is years ahead of us)

... most of the problems with telstra are their ****ed up authentication and mail servers. While most resell the Telstra bottom layer, there are quite a few out there that have their own servers. THOSE are the ISP you wanna go for. I had ADSL on telstra for like a year and it was constantly ****ed up, couldn't log in, servers were down, ****ing rubbish. THEN after that I switched to Netspace.. not a problem, 10 times better.. and when i switched to my router setup permanently connected it had like an up-time of 3 months! 3 months ON permannetly conneted. Telstra could never match that with their servers.

It depends whether the ISP is a layer2 provider or whatever, most still use the bandwidth of Telstra, but the rest of the system is their own..

anyhow...www.whirlpool.net.au - u can learn everything u ever want to know there..

With the "self install" yeah.. it's a doddle to install. .plug modem into filter and then phone line, run the install cd, enter account details and done

If you want to get fancy and have laptops or whatever, you might be best off buying a wireless router or wirelesss router/dsl modem of your own - that way you can just wireless throughout the house to get on the net.

yeah, but imagine being able to beam stuff straight from your PC to your xbox and through your stereo to stream mp3, wma tracks, downloaded movies and whatever else on demand 3 rooms away :) Putting a CD phsyically into a CD player is so passe' man :)

You don't want messy cables running around :)

yeah, but imagine being able to beam stuff straight from your PC to your xbox and through your stereo to stream mp3, wma tracks, downloaded movies and whatever else on demand 3 rooms away :) Putting a CD phsyically into a CD player is so passe' man :)

You don't want messy cables running around :)

I aint that big of a nerd :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...