Jump to content
SAU Community

Driven To Sydney Before?

siddr20

By siddr20,
in South Australia

 Share

Recommended Posts

siddr20 Grand Master

siddr20

Posted
Posted

Hi everyone,

Thinking of purchasing a car here, and if i do go ahead with it i guess i will have to drive it back to Sydney.

So just wondering how long will it take and if its worth it? Or should i just get a car freight company to do it?

Cheers,

Sidd.

Link to comment
https://www.sau.com.au/forums/topic/304343-driven-to-sydney-before/
Share on other sites
jrm Veteran

jrm

Posted
Posted

I drove my R34 back from Sydney, gave me an opportunity to familiarise myself with the car - it was a fairly pleasant trip despite lack of any real stereo (AM/FM had been retuned for aus chans, but otherwise had a tape-deck).

I had an alarm fitted and my car booked into Croyden whilst over in Sydney and had a complete inspection (so I could take it back to the yard if they found any probs my pre-inspection hadn't picked up) and to fit a 3" turbo-back exhaust. I did have the benefit of being able to crash with friends in Sydney to make that easier on me though.

The drive back itself was fairly uneventful and long - took about 15-16 hours in all, sticking to the speed limit - taking plenty of breaks. It's a drive I've since repeated a coupla times since then as I have friends/family in Melbourne and Sydney (sometimes going direct to Sydney via Melbourne to shake it up - doesn't take that much longer and gives more interesting scenery).

Inline 6 Grand Master

Inline 6

Posted
Posted

drive it, its not that far.

frieght company will more than likely flog your car before they put it on or fling it up there with a forklift if you dont give them the keys.

if you can con someone into going just swap drivers every now and then and it'll be easy as.

Madaz Grand Master

Madaz

Posted
Posted

The trip is done in about 14 hours for me in the camry i left sydney at 4.30am missed heaps of traffic personally it will take more fuel in a line so car carrier might be better and safer for break downs

CVAR i think it is looks wrong now, someone will correct me charge $400 on a truck they mark off all prior damage and you sign off both ends

ISC-Performance Veteran

ISC-Performance

Posted
Posted

Just drive it back (nothing better then a road trip) and as above it will get you used to the new car and assure that no damage is caused via a freight company etc. Last time I brought a car back from Sydney I took 2 days x 8 hours (I wasn't in a rush though).

Ryan

Inline 6 Grand Master

Inline 6

Posted
Posted (edited)

o and i used to work in transport and its 3 days standard, less you wanna pay double for xpress and have it go overnight.

and i shudder at the thought of a decent skyline going on the truck the same as the things i seen packed.

Edited by Inline 6
Madaz Grand Master

Madaz

Posted
Posted

Once you start driving you prolly wont want to stop unless your feeling fatigued, my trip went very smooth and easy

In comparison my trip to melbourne in the r33 made me tired and sleepy and thats an 8hr trip

ISC-Performance Veteran

ISC-Performance

Posted
Posted
So say 16-17 hours max. Thats not too bad i guess!! Might just make a stop over somewhere.. have a nana nap and keep driving lol.

Cheers guys!!

If you do have a stop over I recommend staying in "Hay" it's about half way and a pretty decent town.

RubyRS4 Grand Master

RubyRS4

Posted
Posted

Done it before when I picked up my Stagea from Sydney. Drove to Wagga overnight, then Mildura over night. Made a nice road trip of it. I've had freight companies damage my cars before, and don't trust them. They worm their way out of fixing it as much as they can. :ph34r:

Madaz Grand Master

Madaz

Posted
Posted
The trip is done in about 14 hours for me in the camry i left sydney at 4.30am missed heaps of traffic personally it will take more fuel in a line so car carrier might be better and safer for break downs

CVAR i think it is looks wrong now, someone will correct me charge $400 on a truck they mark off all prior damage and you sign off both ends

hahahah looked myself as there near my work

its CEVA sounds similar

dangerman4 Mentor

dangerman4

Posted
Posted

me and a mate did adelaide, sydney, newcastle, and then adelaide without stopping for more the fuel or food.

we had work comitments so taking nanna naps werent a option.

in all we did 3200 kays in 36 hours.

i wouldnt recomend it to most people but, we took turns, and got the job done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...