Jump to content
SAU Community

Recommended Posts

Lads,

Car bogs down from relatively low revs on WOT when coming on boost. Between 2-3500 revs. Its not really stuttering or surging, and not always. Just a dip/flat spot in power.

I havent replaced sparks or coilpacks. From reading threads coilpack failure seems to occur higher in the revs with a prominent stutter??

Mods.

FMIC return flow JJR

z32 NISTUNE

K&N FILTER

3inch exhaust

12psi

187rwkw

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/
Share on other sites

Maybe a leak, check all vac hoses, pipe clamps and the intercooler core for any small pinholes. If it's fine under cold wather conditions and losing boost response under warmer conditions (besides the fact it is warmer and oyu will lose a little power anyway) then a leak it may be.

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/#findComment-5041962
Share on other sites

Has it always been that way? What changed since it started happening? IIRC the z32 Nistune into R33 needs some magic (different TPSes?)

Yeah since ive added to EBC and Nistune. I rarely ever load it up like that so ive never noticed it too much before. Actually noticed it as a passenger for the first time.

Yes it has different tps being a z32 ecu and this causes a stutter on/off throttle....

Its hard to describe the fault without driving it. Ill replace sparks and coilpacks and see what happens. getting turbo highflowed soon so ill probably need to do that anyhow...

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/#findComment-5042739
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Make sure you use the spherical bushes** on the lower arms, ifyou do that. ** at least, if not the whole replacement lower arm.
    • The tap for coolant flow control will be stuck open. It's not just the air door motor that dies.
    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
×
×
  • Create New...