Jump to content
SAU Community

Recommended Posts

Anybody have any experience with these? I know in Australia Noltec make adjustable camber ones but I'm more interested in the japanese ones that are retailing on the perfectrun and taka kaira websites. They both stock Cusco and JIC ones. Just want to know if anybody has these and how they are compared to the stock ones.

Link to comment
https://www.sau.com.au/forums/topic/30449-adjustable-upper-link-arms/
Share on other sites

i got quoted $1100 for japanese adjustable ones called "Midori", the JIC and Cusco ones arent adjustable for ppl with uneven camber on each side. They're bloody expensive ones, anybody had any experience with these. They look abit like the ones Noltec make for r32 gtr

Hi randymoss, I have yet to see an R32 that doesn't need upper front control arm bushes, they are always stuffed. Every second one has stuffed radius rod bushes. I would strongly suggest a set of polurethane bushes, the more the better, have a look here........

www.whiteline.com.au

Every time I fit a set to Skyline the guys always say how much it "improves the car", "stops the wandering", the "crashing noises go away", it "stops better", it "goes around corners now" etc etc

Well worth doing if you intend on enjoying your Skyline for some time.

Hope that helps

Hi randymoss, you asked "l'm looking at getting a set of Tein Castor Rods as well, but want to know exactly the effect of them besides adjustment of castor"

In order to increase the caster they pull the front wheels forward in the guards. Not enough to rub though.

This changes the front steering toe angles and therefore you need to re-align it after fitting and adjusting the caster.

If the Tein caster rods you are looking have sperical joints at the front (not polyurethane or rubber) then you will notice a slight increase in NVH as there is no dampening. Sphericals also wear rapidly on Australian (rough) roads, and they then knock noticeably. They can also need regular greasing if fitted with external grease nipples.

Since they don't have as much "play" as a polyurethane bush they do provide more constant caster settings (less flex) but that comes at the price as above ie; as usual, you don't get something for nothing.

Hope that helps

If the Tein caster rods you are looking have sperical joints at the front (not polyurethane or rubber) then you will notice a slight increase in NVH as there is no dampening.  Sphericals also wear rapidly on Australian (rough) roads, and they then knock noticeably. They can also need regular greasing if fitted with external grease nipples.

Are these the arms you refer to? My GTR has these Tein arms on the front suspension with rose joints on the front end. I've noticed loud "knocking" noises coming from the front of my car (which recently had all Bilsteins rebuilt), and can't work out the source. It's very annoying and to be frank, a little embarrassing, especially when taking a chick out. I've taken the car back to Quadrant twice, and will be taking back again as I'm still not happy, and Nissan don't know where the sound is originating from either.

I've attached 3 pics.

Are these the arms you refer to? My GTR has these Tein arms on the front suspension with rose joints on the front end. I've noticed loud "knocking" noises coming from the front of my car (which recently had all Bilsteins rebuilt), and can't work out the source. It's very annoying and to be frank, a little embarrassing, especially when taking a chick out. I've taken the car back to Quadrant twice, and will be taking back again as I'm still not happy, and Nissan don't know where the sound is originating from either.

I've attached 3 pics.

Hi NRB, yep that's them. I would check the bolts to the lower control arm first, they have a tendency to come loose. Then it's time to check the sphericals at the front of the rods. Yours are non greasable, so if they are worn it is replacement time. I am surprised the guys at Quadrant haven't already tried them as the source of the knocking, they are pretty experienced. Maybe ask them to specifically check the play in the sphericals.

There are a number of other possible causes, but these are all known Skyline sources, they should be able to find it given time. I always try and find a particular bump close to the workshop that always causes the knocking and take them for a ride. You can quickly then know if it fixed.

Hope that helps

Happy New Year to all

Hi Sydneykid, thanks for the input. I'll be dropping in to see Quadrant (again!) and see if they can get a better idea. When it comes to showing them the problem I've noticed is that when I've got a passenger the frequency of its occurence is much reduced.

Hope you had a Merry Christmas and I wish you a happy New Year.

Nick

i've got a knocking sound as well coming from the left hand front of the car when cornering. Any suggestions on where this sound might be coming from, I've narrowed down to one of the bushes but don't know which one. Any ideas on which bush it imght be folks?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...