Jump to content
SAU Community

Recommended Posts

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

can u send me pics of the clutch , and costs for postage to melb post code 3020

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Will take the silicon hose if you will ship to the USA mate..? Postal code 97302... Thanks and Cheers

Edited by levelride

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...