Jump to content
SAU Community

Garage Cleanout - Rb26 Aftermarket And Other Bits

dahandfull
 Share

Recommended Posts

dahandfull Proficient

dahandfull

Posted
Posted

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

turbo rxp Community Regular

turbo rxp

Posted
Posted
Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

can u send me pics of the clutch , and costs for postage to melb post code 3020

dahandfull Proficient

dahandfull

Posted
  • Author
Posted

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

levelride Contributor

levelride

Posted
Posted (edited)
Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Will take the silicon hose if you will ship to the USA mate..? Postal code 97302... Thanks and Cheers

Edited by levelride

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...