Jump to content
SAU Community

Recommended Posts

Hi all looking to buy an GTR R32 as it's the look i like most out of the GTR'S just trying to do research first before seriously taking the next step and buying one, power wise i'm not really wanting to go more than a better fmic, exhaust, and a bit more boost maybe a little large huffers i do have a motec m48 not sure at this stage if that is worth keeping it for the GTR?? as a lot of guys seem to use power fc's? and since the R32 is a lot cheaper these days makes it a good time to find what i'm looking for and at a decent price.

so any do's and don'ts on what i should be looking out for in the R32 GTR i've read that the pre 92 model had issues with the oil pump which was rectified in post 92 models also i like the fact that R32's can be switched from awd to rear wheel drive by replacing the fuse with a switch, just a couple of things i've read so far so any more help on buying a GTR would be much appreciated.

Also what i would like to know is what type of internals from factory does the RB26 in the R32 GTR come with ie: forged rods? forged slugs? ect.. is there a book on the GTR with such info? and most importantly are the five speed gearbox much stronger than a WRX one as the wrx gearbox really lets it down once you up the power somewhat.

PS: only looking for a reliable daily driver with about 260-280kw atw

regards wayne

Link to comment
https://www.sau.com.au/forums/topic/305046-beginners-info-needed/
Share on other sites

People will say look for a post 89, 90, 91, etc.

Basically the newer the model the better the condition should be.

Not totally true.

I've seen 94 examples that looks more shocking than the first bunch that came out in 89.

Before I got my R32 GTR I avoided 89 models because being the first years I thought they may have some initial teething problems as with any first year models. However, if there was a problem then most if it should have been already rectified by their original owners anyway.

That said, getting a latter model would usually be better.

the skyline gearbox is bulletproof in comparison to the wrx gearbox

you wont have any issues with gearbox even with abuse

make sure you have some spare $ on the side in the case of other issues, gtr's can be costly

When you think you've figured out how much it will cost to fix any issues you've found, add approximately 30-500% for all the other unknowns and remember you pay the GTR tax on all parts.

They're not a cheap car to own, even if you do all of the work yourself.

On that note, I love every single minute I spend in mine. Well worth it.

Edited by Bozz
When you think you've figured out how much it will cost to fix any issues you've found, add approximately 30-500% for all the other unknowns and remember you pay the GTR tax on all parts.

They're not a cheap car to own, even if you do all of the work yourself.

On that note, I love every single minute I spend in mine. Well worth it.

Yeah i figured that as my last car was a jap legacy import, genuine parts were at crazy prices, but cars are our passion and i dont know anyone who finds there passions cheap, besides you only live once.

PS: i hear ya about loving every minute in your ride i'd say thats passion wright there :D

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...