Jump to content
SAU Community

Recommended Posts

Hi all,

I'm trying to get a N1 engine identified whilst still in the car. Can anyone tell me where I would find the I.D. numbers? I know I'm after the '24U' stamped on the block....I just don't know where to find it. The car is interstate so I need to let the owner know where to look.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/306166-engine-locaion/
Share on other sites

If its in the same spot as my rb25det. Its located on the passenger side on the block just above the sump and next to where it joins the gearbox. There is a smooth section where it will be stamped on. Mine was hard to read.

Link to comment
https://www.sau.com.au/forums/topic/306166-engine-locaion/#findComment-5063082
Share on other sites

+1..all stamped right on the bell housing, down low, behind the turbo.

To read mine, I had to remove the heatshield...and because it was hard to read...I had to setup a worklight under the passenger side wheel, shining pretty much side on to that flat section with the number...only just barely readable then...I've gotta get around to engraving the numbers deeper.

Link to comment
https://www.sau.com.au/forums/topic/306166-engine-locaion/#findComment-5063140
Share on other sites

The "24U" engine code is not actually stamped on. It's part of the casting of the N1 block. If you want to find the engine number, it's on the driver side near the front on the block. Just checkout the pic. The numbering will go like this:

RB26xxxxxxX

"x" denotes the engine number sequence. "X" means it's an N1 or Nismo block. A standard 05U block with have "A" instead of "X".

post-2802-1264932681_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/306166-engine-locaion/#findComment-5063632
Share on other sites

Awesome cheers for the help guys. Any other easy way (I know the turbos are different?) besides the no rear windscreen wiper & no stereo? I'm just wanting to make sure as the one I'm looking at has got a rear windscreen wiper but the owner is totally sure its a N1. I can only ssume the possibility of the rear windscree nwiper being installed for compliance. Even if its just a clean GTR with a N1 engine (the whole thing...Cams, Block, Turbos etc etc) I'll be happy. If its just the block and the rest is standard GTR I'm not too sure.

Link to comment
https://www.sau.com.au/forums/topic/306166-engine-locaion/#findComment-5064020
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...