Jump to content
SAU Community

Coil Over Rebuild

ashneel

By ashneel,
in Victoria

 Share

Recommended Posts

ashneel Grand Master

ashneel

Posted
Posted

need to get my front left Racing logic coil over rebuild as its got a small leak now. any place local that does rebuilds?

also up to how much have you paid for a rebuild? is it worth getting it done or trying getting a new set?

Link to comment
https://www.sau.com.au/forums/topic/309551-coil-over-rebuild/
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

try bike places.

ktech on westall does bike suspension.

http://www.promecha.com.au/site_map.htm

If not shock rec in qld

http://www.shockreco.com.au/reco.htm

ive used the shockreco joint and it is cheap but is also hit and miss. Thats why i use bike places as they do a better job as usually if you stuff up bike suss someone dies....

Borci88 Veteran

Borci88

Posted
Posted
spoke tot hese guys http://www.promecha.com.au/site_map.htm

$140 to do a rebuild. not a bad price. was thinking it being more.

99% Sure we went to PromechA to do our KX80 bike rear shock, lets just say we left unsatisfied, took it back for a second rebuild for him to fix his mistakes, to this day it still leaks and makes a squelchy sound everytime it compresses, use at your own discretion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...