Jump to content
SAU Community

Recommended Posts

Considering selling my 32 GTR....belonged to another forum user a while back and most of the work was carried out while he owned it.

Car has the following mods and most receipts are available-

Engine/Driveline/Electrics

Rebuilt RB26 by John French motors in QLD

All seals, gaskets, pulleys replaced.

R33 Block

R33 Crank

Forged CP Pistons and rings

Prepped standard rods with ARP rod bolts

Main and Head Stud Kit

N1 Oil and Water pumps

Mild Head Porting with Competition Valve Seats

Tomei full Metal gasket kit

R34 N1 BB Steel Wheeled turbos

Tomei Adjustable cam gears

Full 3" exhaust including Ceramic coated (inside and out) dump pipes.

Apexi PFC with Boost Control option

SX Fuel Pressure Regulator

Tomei Fuel Pump

H/D Clutch kit with Billet Flywheel

Car is only running 1 bar at the moment as stock injectors are hitting their limit, I have a set of Siemens 750cc here that buyer is welcome to purchase.

Probably more to list but that gives an idea for now...

Exterior

Resprayed in factory Charcoal Grey, bonnet was only panel not painted as car had Carbon bonnet on it previously but is still in good condition...car is very, very straight.

Carbon Fibre N1 rear lip from Just Jap

Satin black front lower lip

Brand new Genuine NISSAN and GTR badges on Boot lid

LED Tail ights, not really my cup of tea but theyre there :cheers:

Interior

Very good condition, no bubbling of dash or cracks, seats are clean

Brand new centre vent just fitted

I purchased a stock 32 GTR wheel from Import Monster but wasnt happy with the condition of it so I had it professionally retrimmed in genuine leather with red stitching.

All gauges working perfectly

Nismo white gear knob

Sony Xplod 52x4 MP3 head unit and speakers

Suspension

Front and Rear strut braces

Whiteline H/D Springs front and rear, unsure of shocks but rides nice and firm, car feels very tight.

*Also have a Whiteline Front Camber kit to go on the car and a Tomei Electric/Mechanical HICAS lock kit.

Wheels

Enkei 17x9 all round, wheels were restored and are in perfect nick.

Falken rubber all round.

Car is currently registered but will come with SA Rego, I am taking it for its ID check next week.

$23k.

Car hasnt had front lip painted Satin black in these pics nor or the pics altered in any way, it is glossy, I just spent last few wkends sweatin my ass off buffing/polishing it -

25fpxdd.jpg

2i6lvzl.jpg

11tshhj.jpg

Edited by NSNPWR
Link to comment
https://www.sau.com.au/forums/topic/309894-fs-1989-32gtr-charcoal-grey/
Share on other sites

Its in SA mate, half hour south of the city, cheers.

Car just had a brand new set of custom fitted floor mats made aswell (no rips in carpet), I also have a pair of brand new N1 front bar vents to go with it.

Price is negotiable.

Edited by NSNPWR

Will add-

Car recently had a brand new radiator fitted.

Also has an Immobiliser installed.

Splitfire coilpacks (blue).

Will be fitting freshly painted N1 front bar vents this week.

Brand new clutch fan coming Wednesday.

C's Short Shifter on its way too.

Have also bought some 260/260 Tomei cams, may or may not get around to fitting these but will negotiate with potential buyer if theyre in the car by the time I get some interest.

Not sure what happened to the original pics so heres one I posted earlier!

35n3ej8.jpg

Edited by NSNPWR

More pics-

303jy1j.jpg

Satin Black front lip -

mbhbg7.jpg

Stock tail lights are on the way! LEDs will be for sale... -

v6ntdd.jpg

Engine bay, (coil cover is off atm, getting painted, it has the 34 GTR type badge/logo) -

hsm9ed.jpg

Car comes with a folder full of receipts! Genuine car with lots of hard work done, tests welcome.

Edited by NSNPWR
  • 2 months later...

Still available...will listen to offers and may consider swaps.

Some recent pics, tail light change, rear end make over finished....have also recently fitted brand new interior rear 1/4 window trims ($300 for the pair).

2dt57hd.jpg

2udu6vr.jpg

Cam gears, coil packs etc etc etc....

219bgvr.jpg

Engine covers repainted in wrinkle red/black...

1z2pumf.jpg

Still available...will listen to offers and may consider swaps.

Some recent pics, tail light change, rear end make over finished....have also recently fitted brand new interior rear 1/4 window trims ($300 for the pair).

2dt57hd.jpg

2udu6vr.jpg

Cam gears, coil packs etc etc etc....

219bgvr.jpg

Engine covers repainted in wrinkle red/black...

1z2pumf.jpg

hey mate keen for trades R33 275rwkw on 16psi contact jason located at Strathalbyn 0433626679

  • 4 weeks later...

Car currently sitting here doing nothing due to work commitments, its out of reg but has a QLD RWC, $19k as it sits. No less. Big $$$ in motor etc.

Billy, sorry have gotten back to you mate, just havent had time to get around to doing what needs done and organising inspection.

May also consider swaps plus cash either way for built VLT, S13-S15 Silvia, GTiR Pulsar...please be realistic, I do not want any sh1t boxes or anything that 'needs work'.

Edited by NSNPWR
  • 3 months later...

Has the car got compliance - side intrusion bars , child restraint ETC + all the other bits done , only reason i ask is because its not yet registered in S.A .

Queensland only needs mod plates in S.A we have to get full ADRs done.

One of the nicest 32 GTR's i've seen on the market in ages! Very understated but obviously a great package.

If i was in the market for one (will be some day), i'd be flying over to swap you 19k for that beautiful car!

Best of luck with the sale....be patient and you'll get decent money for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...