Jump to content
SAU Community

Recommended Posts

hi there guys and girls , im new to the site but not new to the R31 as i have owned mine for 7yrs or so now , its not in th best shape but its rd worthy and just needs some TLC and $$ thrown at it ... A work in progress you might say lmao

INFO:

89 Series 3 Sillo Sedan

5 spd manual

Mini spool in the diff 3.89 ratio gearset

Lowered KING SPRINGS front and rear

15" mags from a nissan silvia which bolted on no worries as i was sick of the ugly lookin stndrd skyline wheels lol

Pod filter and modified induction system with extractors and a full 3" mandrel bent mild steel exhaust with highflow cat and cannon in the rear , mot a muffler of hotdog insite and the growl is quite prominent lol

15.79 is the ET at the drags on a 500k+ motor thats not too bad i guess with 2 gears of wheel spin

Looking at putting in a turbo N/A motor that i am collecting the parts for as we speak , so far i have the to4e turbo , highmount stainless manifold , 50mm wastegate and a haltech E6X EMS , need to get the injectors/fmic/head gasket and the various hoses and fittings to do the job , i have a spare motor that i am going to put the bits and pieces on b4 i swap it into the car , hoping to get 750cc injectors and run 14lb boost and i would like a modest 300hp at the rear wheels which shoud make for 13sec ET at the drags ....

anyhow here is the link to my car if you wanna have a look , as i said shes not too pretty and the paint has been through the wars but rome wasnt built in a day :D

http://s791.photobucket.com/albums/yy197/f.../R31%20Skyline/

Link to comment
https://www.sau.com.au/forums/topic/310493-newbie-to-the-site-from-tville/
Share on other sites

nice,

dont ever paint it.

an awesome sleeper!!

first off id like to say welocme to SAU qld ;-)

mud is right i think after ya done the mods you will have a nice lil sleeper but i think you might be selling ya self a bit short when ya said 300hp , im runnin somthin very simler to you in my r33 . i got t04e on modifide hiflow manifold , 750cc injecters and running 35mm external gate thats been plumed right back to the bend ( for better flow ) and with a good tune and my safc2 dialed in right i got 400 rwhp

neway good luck with it

cheers ...... ;-)

mud to be honest i wasnt going to paint it anything flash , just rub back the clear coat and redo that and straighten panels and just get it looking as "normal" as i could so yeah the thought for sleepa is there as i dont wanna advertise to the boys in blue that i have something fun to drive ya know lol

quick33 i might be selling myself short but im also looking at the fact i have an N/A motor and dont wanna wring its neck just yet , if i get a bigger power rating than i'm quoting that would be awesome , the kit i have is a no brand setup not a garret or anything like that but hell when its finished i know it will be a hell of a ride specially with a locked diff and the rain we get here hmmm , i dont thinkill drive it in the wet as ill loose the little bit of plastic in my wallet for sure as im a wet drifter at heart lmao , im from darwin and we had wet or dry conditions so the learning was there for wet drifting , it was a good place to start as i have never driven anything with power besides he V8 holden when i was 17 hehe

anyways guys thanks for the welcome to the site and hope to talk to a few more of you again soon

cheers festa

Hey mate, long time reader first time poster here.

Nice car, i have always had a soft spot for silo's a mate had a nice one with a 20 years ago.. good times!

E6X hey, let me know if you need any wiring troubleshooting or tuning done.

PS: Townsvillian too.

Edited by Jason Broadhurst

hey guys im in townsville aswell and i have some cntacts on parts if you are chasing them and festa bud if you would like a really good set of tail lights bud let me know as i race an r31 in the local motorsports clubs and they are a weapon but im also trying to sell my r32 as i have like 3 skylines now and i think its time to downsize so to speak so if you guys are intereested in parts or tuning feel free to message me

  • 2 weeks later...

hey jason , just got back on the site after not having the net for a little , anyways yeah i will need help when wiring up the haltech so any help would be great , i have a vl wiring loom with the computer harness already wired into it , has injector clips ready to push onto them and i think the o2 sensor with it also , im not sure if i hav to get rid of the origional computer and just use this but im sure you might be able to help with this also , [email protected] is my msn if you wanna add me so we can chat on there

cheers sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...