Jump to content
SAU Community

Recommended Posts

Hi all

Trying to confirm what diff ratio my car has. I believe that the auto's are fitted with a lower diff ratio (3.36?) than the manuals (3.54?) and that generally the autos are open wheelers and the manuals get a LSD standard.

However my V35 is an auto with a LSD fitted as a factory option. So i guess my question is 'will the diff ratio be directly linked to the fact i have a LSD?' It would seem to make sense my car will have the 'manual' diff ratio of 3.54 but i cant confirm this anywhere.

Tried searching on this topic here and the US forums, couldnt find much, so helping someone might be able to shed some light on this.

Cheers

Righto....

100 km/h = approx 2300 rpm in 5th gear

110 km/h = approx 2500 rpm in 5th gear

Anyone with an auto (non lsd) able to do me a favour and test their car's rpms so i can compare?

didnt really look at the 100km/h rev speed but 110km/h is at 2300rpm ( auto non LSD)

hope this helps.

Cheers for you efforts Beez35, but looking at you profile i see you have differing tyres sizes to me so its not 'apples and apples';

19" Intensive Hunk wheels.

19x9.5" +17 Fronts 245/35/19 Nexens

19x11" +10 Rears 275/30/19 Khumos

i run the OEM 19s on 40 series profile.

Thanks also Ceffy, though i am still not left 100% sure i have the auto ratio. Is there anyway to 100% confirm it?

If you want to be totally sure, you could jack up the rear of your car, make alignment marks on the diff input and outputs then turn the input until you have turned the outputs 1 turn, should be 3.3 turns (as opposed to 3.5 for manual). From my experience you would be doing nearly 3000 revs at 110 with a 3.5 ratio diff and an auto. Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
    • Looks great, but I'm always concerned that it makes it difficult to see what level the fluids are at. Am I overthinking this?
×
×
  • Create New...