Jump to content
SAU Community

Recommended Posts

hey guys im selling my spare rb26 from my second r32 gtr which was imported just as a parts car for my better gtr to get those hard to get genuine smaller items... selling to try and free up some shed space , info below

r32 rb26 engine 100% complete as removed from the car with all accesories (other than a/c compressor) and bolt ons but no clutch or flywheel

all electronics included such as afm's coils ignitor cas ecu loom etc etc

nismo ball bearing turbos

the engine runs very VERY well blows no smoke no rattles and was very very quick

oil was changed and flushed prior to removal for better/longer storage capability engine has been turned over by hand every few weeks to keep everything sweet

currently the engine has a blown head gasket between cylinders 2 and 3 not into water or oil at all but you would never know i just found this when i did a routine compression and leak down test prior to removal from the car it was in ,from memory the other cylinders were within spec also, to me this is not an issue because whenever i install a engine i usually like to use a steel head gasket straight up , so its not like its a real problem

several members from this forum have seen the engine running it runs quiet and 100% smooth and "normal" with no issues it diddnt have a missfire at all and diddnt even show any signs of a blown head gasket what so ever... ran perfectly fine and drove awesome under load and it would have smashed my v spec gtr easilly

price for engine ecu loom afms accesories and bolt ons as a complete bolt in turn key package including the nismo ball bearing turbos $4800

any other questions just hit me up and ill answer as best as i can , any pre purchase inspection within reason is fine by me as long as you prove to me you are serious and have the cash

r32 gtr gearbox and other r32 gtr parts available upon request

located 1 hour west of Brisbane

cheers

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/311740-complete-r32-rb26-engine-package/
Share on other sites

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

may seperate accesories and loom ecu etc for someone who just needs an engine.... but pm your offer and list of what you do and do not want

i will not even consider selling small items untill the bulk has been sold

  • 2 weeks later...

i am unsure on specifications all i know is that when the car was purchased it was told that it had nismo turbos and these turbos do have the little rectangle cast into the compressor covers like the nismo turbos you see all around the net

comp covers like these below.... normal factory plain bearing turbos do not have this afaik

TK-RB26DETT-GT2860R.jpg

another example

it was a little laggy but it went like stink when it came on at 1 bar of boost :)

Edited by WHITE R32
$3990

Still interested in the whole package.

I will have to upgrade the crank collor to put the whole package into a GTR33 ( recovering a Racepace motorsport gun engine with 400kwrw to put into my track car )pm me or call me on 0433 878905 to discuss further.

Alex

ww.jds-auto-imports.com

mayyyyy consider selling turbos seperate but id have to find out exactly which ones they are somehow first

tim/alex... if you are interested pm me back as im not sure what youre on about there??

hey mate... check the serial numbers on the core.. there should be a little metal tag.. saying what the product number is..... and then post it up on here, there are plenty of ppl on this site that can tell u what they are from those numbers..

yeah from what i can see thus far there are no tags otherwise id have posted them up already

the car was reasonably laggy compared to a std one and when it hit at 1 bar boost it hit bloody hard which made me look into it which was when i discovered the compressor covers which resemble the bb/nismo versions but as far as exact model type i dont think id know untill i relove and measure them up which i dont really want to do unless the engine or the turbos have been sold... rather keep it complete and in the one place with no small parts missing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...