Jump to content
SAU Community

Recommended Posts

CHEAP R33 SKYLINE 1995 RB25DET 5 SPEED! 435HP @ WHEELS, MOTOR DOWN ON COMPRESSION, THOUSANDS $$$ WORTH OF MODS

Location: QLD: Brisbane

Condition: Used

Reason for Selling: NO TIME TO FIX

Asking Price: 9500

Delivery Methods: PickUp

Contact Info: [email protected] 0418 537 181 or PM

Extra Information:

*This car is down on compression on 1st and 5th cyl, suspected ring or ringland problem. car still runds, idles and drives smooth. breathes heavy out of the cam covers*

1995 NISSAN R33 SKYLINE

RB25DET, 5 SPEED

car is stil regoed until the 7th month 2010

chassis has 161xxxkms

mods:

Engine:

forged pistons

eagle rods

total seal ring kit

head stud kit

main stud kit

cosmetic head gasket

ported head

550cc sard injectors

sard fuel pressure regulator

bosch 040 intank pump

Hardcore racing billet inlet plenum (rare)

100mm billet throttle body

garret gt35 .82 roller bearing turbo

external gate

stainless manifold with screamer

Z32 AFM

HKS Pod filter

turbosmart boost controller

Apexi Power FC with H/C

3.5" HKS Super Dragger exhaust

FMIC with stainless piping

driveline:

brand new exceddy button clutch

unknown mechanical diff

fresh pads front and rear

Suspension:

Aftermaket lowered springs and shocks (stiff)

front strut tower brace

Interior:

JVC touch screen DVD/TV

HKS boost gauge

HKS turbo Timer

Air Fuel ratio gauge

Mongoose alarm

rolling stock:

Nismo LM GT1 17x8 and 17x9 wheels (light and rare)

body:

paint is in good condition with only a couple of blemishes, front bar has recently been resprayed.

NO RUST

Sunroof, all work perfectly

all electrics work

Car itself is in good condition. Has had thousands spent on it! before this issue this engine made 435HP @ the wheels and would easily run 11sec passes with traction.

did a compression test last friday, 1st and 5th cyl are down on compression. will be ring or ringland failure. i just dont have the tiem to fix it so im selling it as is.

can also supply a fresh rb25det motor +rb25 box with this car for $3000. stocko unmodified low km motor purchased from Erin @ JDM Garage

selling for $9500 with rego. obviously no RWC

may also consider swaps

please call 0418 537 181 or pm

peace

post-15190-1269223448_thumb.jpg

post-15190-1269223564_thumb.jpg

post-15190-1269223631_thumb.jpg

post-15190-1269223686_thumb.jpg

post-15190-1269223809_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...