Jump to content
SAU Community

Display On Commander

951's 330i

By 951's 330i,
in Engines & Forced Induction

 Share

Recommended Posts

951's 330i Rookie

951's 330i

Posted
Posted

Hi paul, friend of mine told me to come to this site for answers. I just bought a power fc for my ECR33 rb25det in my s14 chasis.

When i connect my PFC, and then the commander to the PFC. nothing happens. I hear a click and i read on that on here. The guy i bought it off of says it works but the contrast must be low. I see how to get to it on the manual, but since i cant see it on the commmander, i was wondering if you knew of any other way to reset it?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/315665-display-on-commander/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

moved from tutorial. as per my PM it sounds like your install is mangled, the PFC is damaged or something is wrong on your wiring loom. check the basics. i will send you the keystrokes on how to DATA INIT the PFC without looking at the screen but i dont think it will help.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      Sane enough. Remove the roof liner, because the acid will go everywhere.
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • jtha7
      New r33 owner

      By jtha7 · Posted

      My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Shizu
      New r33 owner

      By Shizu · Posted

      Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • soviet_merlin
      The Evolution Of "night Fury"

      By soviet_merlin · Posted

      Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...