Jump to content
SAU Community

Recommended Posts

Apologies for showing enthusiasm re cruise 2nd May. Personally officer Neil can go over my stock 240K with a fine tooth comb if he likes. Hoon drivers, ego trippers and those intolerant of new members not welcome anyway. If your interested in a legal cruise and the opportunity to check out some fine rides then please contact me via PM or reply below. Thank you for the opportunity to organize this on your site.

Regards

Martin

Link to comment
https://www.sau.com.au/forums/topic/317345-intelligent-responses/
Share on other sites

Just to clear up something from my previous post one of you chaps commented on picking on the kid once then let it go, difficult to hear when you are a 42 yo 6'4" bloke. Good idea to meet for dinner and see if the same cheeky attitude is expressed there by some of the more beligerent members who commented. Would prefer R31 or older for this run anyway.

Marty

Edited by Lo K 240

For future reference, please put some thought into your topic titles .... "Intelligent Responses" is not even close to acceptable - make your topic title very pertinent. Everyone (especially me) does not want to have to open your topic to see what it is about. Good luck with your cruise.

And for the record, your car can be 100% legal, yet if officer Neil wants to defect you, rest assured he will. He only has to suspect illegal mods (or any variety of unroadworthiness) and he will send you to Regency, when your slight oil leak at the rear of the engine is noticed, old/worn bushes will fail inspection, suspension components will be scrutinised (and on a 240k almost certainly fail in some respect).

Just to clear up something from my previous post one of you chaps commented on picking on the kid once then let it go, difficult to hear when you are a 42 yo 6'4" bloke. Good idea to meet for dinner and see if the same cheeky attitude is expressed there by some of the more beligerent members who commented. Would prefer R31 or older for this run anyway.

Marty

Mate, if your shouting, I'm there!!

Welcome aboard Marty.

It is good to have someone showing enthusiasm, especially for the older rides. I would bring out my R31 GTS2 however I will be away that weekend.

Bear with us initially while you discover our forum etiquette... we do get a lot of toolbags (especially in school holidays) trying to arrange fully sick cruises etc.

And for the record, your car can be 100% legal, yet if an officer wants to defect you, rest assured he will. He only has to suspect illegal mods (or any variety of unroadworthiness) and he will send you to Regency

And this is why our defect/roadworthy inspection system is up the shit. Too much faith in police discretion.

Thanks gents thats much more civil, have posted this cruise on Ozdat for sure. My vision was for Datsuns/ Nissans from the early 60's to current models to take part in this cruise as an exhibition of old school to current technology. If newish Nissan owners are only interested in cannonball runs and are rightly worried about being targeted by the cops then thats fair enough, I'm sure theres plenty of other cruises to suit that can be organised in stealth. Hopefully if the boys in blue are reading this they'll take into account the legal framework thats being applied to this cruise and show some encouragement for some enthusiasts enjoying themselves in a legal manner. My 240K won't be doing any burnouts as all it does is fry the clutch with hardly any wheelspin- not that I've ever tried it, sort of. Anyway I probably havn't given enough notice for there to be the numbers I would like. Unless I can get a lot more committed yeses its looking like I'll pull it.. so to speak.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...