Jump to content
SAU Community

Fs: Highflowed Vg30 Turbo

HR31_RB20DET

By HR31_RB20DET,
in Classifieds

 Share

Recommended Posts

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted

VG30 Highflowed turbo (OP6 rear housing) built by Precision Turbochargers, running t04b internals and is plain bearing. Has done approximately 8000 to 10,000k's in the last 1 and a half years which most of the k's being highway driving. But other then general street/highway duties, this turbo has done 3 drag meets (about 15 runs) and a couple of hours on the dyno.

This turbo on my RB20 was making 300rwhp on 18psi, though on a RB25 I'd expect closer to 350rwhp on 18psi.

This turbo is in great condition, has the same amount of shaft play as when first installed.

Also includes a modified oil line which is need to run this turbo aswell as the banjo bolts on the turbo side for the water in/out.

All thats needed to bolt this turbo on is the elbow and the metal oil drain pipe off an RB25 turbo.

NOTE: Also if required I can supply a R33 RB25 actuator.

IMG_2774.jpg

IMG_2777.jpg

IMG_2778.jpg

IMG_2781.jpg

Asking $900 + postage.

Located in Ipswich QLD (just outside Brisbane)

Please PM for further info.

Link to comment
https://www.sau.com.au/forums/topic/318450-fs-highflowed-vg30-turbo/
Share on other sites
HR31_RB20DET Proficient

HR31_RB20DET

Posted
  • Author
Posted

Hey Dave, Nah it doesn't have a build plate.

On my RB20 it started making boost at 3000rpm and made 18psi around 4300-4500rpm, though on an RB25 I guess it would come on 500rpm earlier then a 20, so say 18psi around 3800-4000rpm.

  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 3 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Rusty roof repair

      By Kinkstaah · Posted

      Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • Watermouse
      Unpeeling the Orange

      By Watermouse · Posted

      I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • Murray_Calavera
      Rusty roof repair

      By Murray_Calavera · Posted

      I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • MBS206
      Rusty roof repair

      By MBS206 · Posted

      Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • PranK
      Rusty roof repair

      By PranK · Posted

      So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...