Jump to content
SAU Community

Fs: Highflowed Vg30 Turbo

HR31_RB20DET

By HR31_RB20DET,
in Classifieds

 Share

Recommended Posts

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted

VG30 Highflowed turbo (OP6 rear housing) built by Precision Turbochargers, running t04b internals and is plain bearing. Has done approximately 8000 to 10,000k's in the last 1 and a half years which most of the k's being highway driving. But other then general street/highway duties, this turbo has done 3 drag meets (about 15 runs) and a couple of hours on the dyno.

This turbo on my RB20 was making 300rwhp on 18psi, though on a RB25 I'd expect closer to 350rwhp on 18psi.

This turbo is in great condition, has the same amount of shaft play as when first installed.

Also includes a modified oil line which is need to run this turbo aswell as the banjo bolts on the turbo side for the water in/out.

All thats needed to bolt this turbo on is the elbow and the metal oil drain pipe off an RB25 turbo.

NOTE: Also if required I can supply a R33 RB25 actuator.

IMG_2774.jpg

IMG_2777.jpg

IMG_2778.jpg

IMG_2781.jpg

Asking $900 + postage.

Located in Ipswich QLD (just outside Brisbane)

Please PM for further info.

Link to comment
https://www.sau.com.au/forums/topic/318450-fs-highflowed-vg30-turbo/
Share on other sites
HR31_RB20DET Proficient

HR31_RB20DET

Posted
  • Author
Posted

Hey Dave, Nah it doesn't have a build plate.

On my RB20 it started making boost at 3000rpm and made 18psi around 4300-4500rpm, though on an RB25 I guess it would come on 500rpm earlier then a 20, so say 18psi around 3800-4000rpm.

  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 3 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • MBS206
      Strange issue RB25DET wont start

      By MBS206 · Posted

      What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...