Jump to content
SAU Community

Recommended Posts

sadly due to financial reasons im going to have to sell my super-awesome-massive-dish wheels.

16hrmsl.jpg

1ekw3s.jpg

they are Weds Kranze Shoki, a quality Japanese wheel.

5 x 114.3

sizes are 18x9 fronts (ill have to check the offset)

and rears are 18x11 -15.... yes negative 15

overall condition is good, they have a very very minor rash marks, visible in the second picture, and the stickers are a little worn, will look great with a good polish.

wheels do not come with tyres.

serious wheels so asking for serious buyers only...

asking 2.5k. all serious offers will be considered

located northern beaches, sydney, might be able to arrange freight too if required.

wow i wish u were in Bris would love to see how these would fit on my 33, posting rims seems like a pain in the arse cost wise??

Aussie post will take box's up to 20 kgs

if dimensions of box is too big[for tham to accept]just crush/tape down the corners

then its charged by cubic volume

shitloads cheaper than courier services

Aussie post will take box's up to 20 kgs

if dimensions of box is too big[for tham to accept]just crush/tape down the corners

then its charged by cubic volume

shitloads cheaper than courier services

just curious how much does each rim weigh?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...