Jump to content
SAU Community

Recommended Posts

All,

Dave from moto concepts has asked for my to try and organise another skid pan Day on Sat 27th March. After the 20 + no shows at the last day the following format will be tried.

Both pans again, the large skid pan and the figure 8, we will have 2 instructors.

Early morning, one person on a pan at a time so you can get confidence in your car and the track. After this double shoot outs with chase time on the figure 8.

You will get heaps of pan time and do around a tank of juice. There will be little wear on your car as you dont get much over 80km/hr, and your tyres will skid most of the day do wear will be nothing over the day.

The cost

35 Cars on the day, $75 deposit needed for non members $50 for members

$150 per car 35 names max,

$50 per additional driver,

$10 per passenger (Wrist bands to be used to ensure on driving

I will need a $75 deposit for non members and $50 for members

Deposits are transferable to other drivers if you cant make it, the focus is on ensuring numbers not to take your money.

I will assume 5 drop outs on the day so 30 people for the day will be comfortable.

Any questions please let me know.

Thanks OZ

Link to comment
https://www.sau.com.au/forums/topic/31869-skid-pan-ec-sat-27th-march-04/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Guys: just a reminder. There's an election on the 27th march and you have to vote IN YOUR ELECTORATE (there are no absent-t votes...). If you won't be in your electorate that day, ring your council and get a postal vote application sent out.

Just thought i'd better remind you when i saw the date.

Cheers,

Dave.

COUNCIL elections mate... tht's just the way they are... it's basically to save A LOT of time for eletoral emplyees... saves a lot of excess work, excess counting and excess preperation...

I work for the electoral office and i can tell you, you have no idea how much extra work there'd be if it where any other way....



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...