Jump to content
SAU Community

Recommended Posts

Possibly thinking about selling up the bits I have been collecting for my car the past year in order to put the money into a house. Put up any interest you have but I am waiting on a call back about a house so I might not sell so see how it goes. And before someone says to themselves why the hell am I posting this if im not 100% its because if i do need to sell up I will know who wants what and I can get money right away.

Power FC plus Handset to suit r34 GTT, Z32 AFM plus plug/wiring and near new 02 sensor for R34 GTT- $1500

Low km HKS 25/30 BB Turbo, All lines (Braided oil feed) HKS Actuator and HKS hard pipe (It's a short 90 degree elbow that goes directly onto the turbo snail) no shaft play and no metal missing off the blades. Will bolt directly to standard manifold - $1500

Power Enterprise Injectors to suit R34 RB25, bought off another forum member and done not even 5000ks. New O rings. Im positive they are 650cc but as I am not home for 2 weeks I can't check the part number. They are yellow if that helps - $600 (were over $1200 new)

Mint Just Jap turn flow cooler will all pipes and the additional one you have to buy, done about 10,000ks - $500

R34 GTT Manual set up. Clutch pedal plus master, Brake Pedal and Accelerator and foot rest. I bought a complete set up off a member not long ago and put that aside to do my car but I tracked down and bought this set as someone else I know was after some for a track car but he has since gone to an AM set up - $250

Giulian

Link to comment
https://www.sau.com.au/forums/topic/319834-eoi-am-bits-for-r34-gtt/
Share on other sites

  • 1 month later...
Possibly thinking about selling up the bits I have been collecting for my car the past year in order to put the money into a house. Put up any interest you have but I am waiting on a call back about a house so I might not sell so see how it goes. And before someone says to themselves why the hell am I posting this if im not 100% its because if i do need to sell up I will know who wants what and I can get money right away.

Power FC plus Handset to suit r34 GTT, Z32 AFM plus plug/wiring and near new 02 sensor for R34 GTT- $1500

Low km HKS 25/30 BB Turbo, All lines (Braided oil feed) HKS Actuator and HKS hard pipe (It's a short 90 degree elbow that goes directly onto the turbo snail) no shaft play and no metal missing off the blades. Will bolt directly to standard manifold - $1500

Power Enterprise Injectors to suit R34 RB25, bought off another forum member and done not even 5000ks. New O rings. Im positive they are 650cc but as I am not home for 2 weeks I can't check the part number. They are yellow if that helps - $600 (were over $1200 new)

Mint Just Jap turn flow cooler will all pipes and the additional one you have to buy, done about 10,000ks - $500

R34 GTT Manual set up. Clutch pedal plus master, Brake Pedal and Accelerator and foot rest. I bought a complete set up off a member not long ago and put that aside to do my car but I tracked down and bought this set as someone else I know was after some for a track car but he has since gone to an AM set up - $250

Giulian

hi Giulian very intersted in your power fc shoot us a pm if you are going through with the sale

thanks

Jason

Hey guys, At this stage the sale isnt going ahead, fitting the new box tomorrow.

Will keep you both posted.

The injectors are direct fitment as thats what I wanted to buy for ease of install and to keep the bay looking standard, If a cop was to see a spaced up fuel rail or some differences they may take a further look lol. And if people think cops dont know what they are on about some do!

A mate was screwed over by a cop who knew what and where to look for pretty much everything. He has a pretty well hidden boost controller and other bits and pieces and this prick almost picked up everyone

  • 5 months later...

Hi Mate,

I'd be interested in the cooler kit when your ready to sell!

Sorry mate never saw this rep[ly, I know its a long shot but are you still after a cooler?

PM me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...