Jump to content
SAU Community

Max boost from HKS 2510

cefiro

By cefiro,
in General Automotive Discussion

 Share

Recommended Posts

GTRman1992 Proficient

GTRman1992

Posted
Posted

The boost isn't a problem if the engine is tuned to handle it. You need the right fuel delivery and timing adjustment to stop the engine destroying itself. This must be set up be a professional. I know of 3 guys who have smoked their engines just playing with the boost alone.

cefiro Experienced

cefiro

Posted
  • Author
Posted

thats on the to do list, get it tuned on the dyno so I am saying that it may have been chipped already but will have to see. I was just worried about pushing the turbo too hard and figured to keep it under 1.1 bar.

but the question really is what kinda boost can I run with the ecu tuned properly.

Cheers Ben

GiJOr33 Experienced

GiJOr33

Posted
Posted

it's a HKS ball bearing turbo. It will probably do 1.7bar easily. HKS turbos are known for having high efficiency ranges, so when it's at 1.5 bar say it works the best. But on a bigger engine you might be trying to put too much exhaust gas through the exhaust housing in the higher revs so the power will drop off.

Give it a go on the dyno... just tune it to what power you want if you have all the support systems to go with it!

When i say whatever power you want i mean that the turbo will allow, a 2510 won't net you 500hp no matter how much boost you screw through it!!!!

cefiro Experienced

cefiro

Posted
  • Author
Posted

Yeah thats good as I can get some more jucie out of it. But as you said I think the key is in the duno and see how things go there. anyone got any suggestions as to where a good place to go is. Silverwater A S, I know are good but maybe a other places would be good just to get some ideas.

Thanks everyone for their input.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...