Jump to content
SAU Community

Recommended Posts

I have a rb25det that will suit rebuild, has blow by so suspect rings. Still runs fine and has oil pressure. Motor will come complete with high flow injectors, super spark coils, rb20 engine harness and computer. $1000

Rb25det manuel gearbox. Shifts fine havent had a problem with it at all. $1300

Gearbox mount for R32 to suit rb25det gearbox. $100

Front mount intercooler (don't know what brand) and all pipeing to suit R32. $350

X force dump pipe, complete 3inch exhaust. Average condition, has seen some ripple strip action. $150

Cooling pro alloy radiator and au thermo fans suit R32. $350

Z32 airflow meter. $150

R32 gtst standard airbox and intake pipe. $150

I will try and get some photos up tomorrow night when there is better light. Everything will be coming out of the car this weekend. Can hear/see in car before weekend if you wish. Will probably have a couple of other things to put up then to. I am located in Cranbourne Vic, would rather local pickup but maybe able to work something. Feel free to contact me on 0438814286 if you have any questions.

Cheers Mark.

Link to comment
https://www.sau.com.au/forums/topic/320050-r32-rb25det/
Share on other sites

I have a rb25det that will suit rebuild, has blow by so suspect rings. Still runs fine and has oil pressure. Motor will come complete with high flow injectors, super spark coils, rb20 engine harness and computer. $1000

Rb25det manuel gearbox. Shifts fine havent had a problem with it at all. $1300

Gearbox mount for R32 to suit rb25det gearbox. $100

Front mount intercooler (don't know what brand) and all pipeing to suit R32. $350

X force dump pipe, complete 3inch exhaust. Average condition, has seen some ripple strip action. $150

Cooling pro alloy radiator and au thermo fans suit R32. $350

Z32 airflow meter. $150

R32 gtst standard airbox and intake pipe. $150

I will try and get some photos up tomorrow night when there is better light. Everything will be coming out of the car this weekend. Can hear/see in car before weekend if you wish. Will probably have a couple of other things to put up then to. I am located in Cranbourne Vic, would rather local pickup but maybe able to work something. Feel free to contact me on 0438814286 if you have any questions.

Cheers Mark.

Interested in the Gearbox mount but may be picking one up this friday, if not ill take it

i'll let you know

Cheers

Ash

Link to comment
https://www.sau.com.au/forums/topic/320050-r32-rb25det/#findComment-5225330
Share on other sites

Sorry it won't let me reply to your pm's as I don't have enough posts. Best would be to give me a call on 0438814286. $1300 is the lowest I want to go with the box. I have Thursday night off so everthing will be out then now. Helltd don't know if I'll have it running for drift attack. I'll be there to watch and talk shit atleast

Link to comment
https://www.sau.com.au/forums/topic/320050-r32-rb25det/#findComment-5226300
Share on other sites

post-60380-1273743534_thumb.jpg

Sorry for the crap photo but dont have much room to move at the moment.

post-60380-1273743662_thumb.jpg

post-60380-1273743858_thumb.jpg

Button center is worn to the rivits but pressure plate is alright. Might be good to someone $50

post-60380-1273743983_thumb.jpg

Couple of small dints in pipes but cooler still good.

post-60380-1273744123_thumb.jpg

Standard R32 GTST front discs. In good condition. Took them of to do brake conversion. $50

post-60380-1273744214_thumb.jpg

Standard R32 GTST front LCAs and castor arms. Ball jionts still good. $50

post-60380-1273744350_thumb.jpg

Rb25det starter motor. $40

post-60380-1273744476_thumb.jpg

Standard R32 GTST front and rear sway bars. $50

Also have rear grey seat for R32 4 door in good condition. $80

Link to comment
https://www.sau.com.au/forums/topic/320050-r32-rb25det/#findComment-5231846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...