Jump to content
SAU Community

Recommended Posts

Im willing to give ya all 4 for the price of one.... they have sat for a while so I'd get them checked first if I were you. They didnt leak on my car but that was some 3 years ago.

$50 they are yours...only after you have confirmed they dont leak, yep just throw us the cash if they are ok. Who knows you might get lucky and a couple are good.

LOL Like I'm EVER going to have a ca again...thats if they are 440s...I'll have to check first. Ill do that now so I dont forget. :D

Im willing to give ya all 4 for the price of one.... they have sat for a while so I'd get them checked first if I were you. They didnt leak on my car but that was some 3 years ago.

$50 they are yours...only after you have confirmed they dont leak, yep just throw us the cash if they are ok. Who knows you might get lucky and a couple are good.

LOL Like I'm EVER going to have a ca again...thats if they are 440s...I'll have to check first. Ill do that now so I dont forget. :P

awesome, thanks very much for helping me out! appreciate it :)

I'll only need to use them if my current one cant be fixed with new seals.

Shoot us a PM with any info

btw; what was the result of your car after the driver dynamics drift day? hopefully nothing expensive broke?

cheers

Hey Rekin, yours looks like it's the bottom seal. Mine looks loads worse than that. I really need to find a place with the seals for all injectors that don't want to charge half my left arm for them

the place where I got the injectors cleaned supplied seals too, but seeing as my bottom seal may be leaking i dont know if thats a good solution to your problem? haha

I could have just farked up the installation, will see once its pulled out if the seal is ripped etc

LOL nar was just the handbrake cable wrapped around the tailshaft. My car didnt like ripping up the handbrake as much I didnt haha. It rejected it.

Bad news on the injector front tho...they are actually red top ones. rx7s 550s maybe. I must have upgraded my gtr ones to these, so these will be useless for you. Im so sorry huni. Ill have a look through the rest of my parts on Sunday...never know whats in there.

Wished I could be more help...unless you can find 2 more of the red ones... :)

LOL nar was just the handbrake cable wrapped around the tailshaft. My car didnt like ripping up the handbrake as much I didnt haha. It rejected it.

Bad news on the injector front tho...they are actually red top ones. rx7s 550s maybe. I must have upgraded my gtr ones to these, so these will be useless for you. Im so sorry huni. Ill have a look through the rest of my parts on Sunday...never know whats in there.

Wished I could be more help...unless you can find 2 more of the red ones... :P

good to hear it wasnt anything major

haha bummer no problem. Thanks for the searchin :)

Anyone else got a spare injector floating around?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...