Jump to content
SAU Community

Recommended Posts

Hi folks. I have bought myslef a low k, very clean r33 gts-t manual.

have serviced all the oils, plugs and timing belt and am now ready to start the power mods.

My question is in relation to the exhaust. My car wa imported with a stainless steel 3 inch mandral exhaust. It has two large mufflers on it. the one at the back is slightly larger. They have a JASMA badge on them and K&F i think it was stamped into them? lookign inside with a torch the back one seems to be straight through but has two pipes running through the body but single 3" in and out.

My question is are these any good? do they flow well and not worht changing? the system has a nice note but is very quiet (definately legal!) Any recommended way of getting a little more noise out of it without bringing on drone?

thanks in advance

Jason

also does anyone have a pic of the standard cat, i think the system has a aftermarket cat on it but it dosnt have a brand on it so i cant be sure.

I want to change the dump pipe to a 3inch unit soon so wondering if its worth doing the cat while im in there

thanks!

when you pull the dump pipe off just take the cat off etra 2 bolts and have a look the inside of it if its still the compliance cat then you wont be able to see light through it or nrealy none and a high flow you should see heaps easy :P

Mine has a 3" system on it a trust cat back with 2 mufflers and its very very quiet but still flows no problems and when on the dyno wasnt a restriction at all so just because its quiet dosent mean its no good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...