Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Hi there :ph34r:

Do have the drivers side window motor? If so would you be happy with $80? I'm on the GC so easy enough to pick up if you're ok with that?

Let us know.

:thumbsup:

hi, im after the long part of the dash that goes under the steering wheel colum, its has a fuse box cover on this part im after as well.. only after it if it has no broken mounts and good condtion.. let me know.. thanx

Hi there, was after a pasenger side window. If ya got it still how much posted to Lismore 2480?

Cheers Aaron.

Hey peoples!

I have a Silver 33 Series 2 gtst that I am wrecking have pretty much all parts available. If a part you are after isn't listed, just ask. EVERYTHING MUST GO – Have no where to put all the stuff – so if its not sold by Tuesday (or interest shown) then it will be going to the TIP!!! Don't miss out !!!

Parts are located on Gold Coast, QLD

please call me 0450 269 460 or Jase 0433104519

RB25det - engine – has been hit front on – engine has been pushed back through the firewall – probably needs new cams – bought the engine back in August for $1500 at around 70,000 k's had 160 – 165 compression in all 6 cylinders back then – I haven't drifted the new engine and only been running stock boost. (maybe done 2 skids in it ) been a good engine – so sad! I know when I was looking for a long motor couldn't find anything decent under $1200. . . . but I will let this go for under $1,000 – so make an offer

Standard highflowed turbo – front housing is damaged – but if someone has a blown turbo or something I've been told that you can put the turbos together or something – dunno if anyone is interested – make an offer

Starter motor / alternator / steering rack with ignitation barrel and nismo key

Standard inlet manifold, / Standard throttle body / Standard injectors & rail / Standard fuel pump (maybe on way out? But never gave me any trouble – just something that someone told me – but might be good for someone that needs a fuel pump just for the moment)

Standard coil packs, perfect working order -

Handbrake assembly

Standard ECU – Standard wiring loom –

Standard coil packs, perfect working order -

Air flow meter

Heavy Duty NPC clutch – on way out I thinks

RB25det gearbox / Tail shaft / R33 Diff – shimmed a few years ago

Tein adjustable coilovers – no leakage, like perfect – still have user manuals etc

standard control arms and stuff

Standard strut bars

Rear cradle

HICAS

RB 25 tappet cover

dash surround / centre console / door cards / gear knob / rear interior cards / roof lining / carpet / boot interior & carpet / door sills / climate control / indicator and window washer thingies / hold onto dear life roof holdy things / seats / seat belts / interior lights / Pedals & cables / boot and petrol cap cable / battery in boot holder thingy / Antenae arial thingy (anyone who knows my car knows how clean and tidy the interior was – everything is in MINT condition – even the seats aren't faded)

Rear view mirror / Interior light / series 2 instrument cluster

Silver - 33 rear wing / rear bar / boot / doors / rear windscreen / rear windows / front windows / front window motors / electric mirrors / rear tail lights / side indicators / skyline thing that goes between taillights – centre garnish / petrel cap cover / fuel tank

all reasonable offers considered, as i need to move this gear. Like YESTERDAY – Don't miss out - call me 0450 269 460 or Jase 0433104519

FYI - Brakes & Rear hubs sold - but the actual rear cradle still available and front lower control arms available

  • 4 weeks later...
  • 1 month later...
Hey peoples!

I have a Silver 33 Series 2 gtst that I am wrecking have pretty much all parts available. If a part you are after isn't listed, just ask. EVERYTHING MUST GO – Have no where to put all the stuff – so if its not sold by Tuesday (or interest shown) then it will be going to the TIP!!! Don't miss out !!!

Parts are located on Gold Coast, QLD

please call me 0450 269 460 or Jase 0433104519

RB25det - engine – has been hit front on – engine has been pushed back through the firewall – probably needs new cams – bought the engine back in August for $1500 at around 70,000 k's had 160 – 165 compression in all 6 cylinders back then – I haven't drifted the new engine and only been running stock boost. (maybe done 2 skids in it ) been a good engine – so sad! I know when I was looking for a long motor couldn't find anything decent under $1200. . . . but I will let this go for under $1,000 – so make an offer

Standard highflowed turbo – front housing is damaged – but if someone has a blown turbo or something I've been told that you can put the turbos together or something – dunno if anyone is interested – make an offer

Starter motor / alternator / steering rack with ignitation barrel and nismo key

Standard inlet manifold, / Standard throttle body / Standard injectors & rail / Standard fuel pump (maybe on way out? But never gave me any trouble – just something that someone told me – but might be good for someone that needs a fuel pump just for the moment)

Standard coil packs, perfect working order -

Handbrake assembly

Standard ECU – Standard wiring loom –

Standard coil packs, perfect working order -

Air flow meter

Heavy Duty NPC clutch – on way out I thinks

RB25det gearbox / Tail shaft / R33 Diff – shimmed a few years ago

Tein adjustable coilovers – no leakage, like perfect – still have user manuals etc

standard control arms and stuff

Standard strut bars

Rear cradle

HICAS

RB 25 tappet cover

dash surround / centre console / door cards / gear knob / rear interior cards / roof lining / carpet / boot interior & carpet / door sills / climate control / indicator and window washer thingies / hold onto dear life roof holdy things / seats / seat belts / interior lights / Pedals & cables / boot and petrol cap cable / battery in boot holder thingy / Antenae arial thingy (anyone who knows my car knows how clean and tidy the interior was – everything is in MINT condition – even the seats aren't faded)

Rear view mirror / Interior light / series 2 instrument cluster

Silver - 33 rear wing / rear bar / boot / doors / rear windscreen / rear windows / front windows / front window motors / electric mirrors / rear tail lights / side indicators / skyline thing that goes between taillights – centre garnish / petrel cap cover / fuel tank

all reasonable offers considered, as i need to move this gear. Like YESTERDAY – Don't miss out - call me 0450 269 460 or Jase 0433104519

FYI - Brakes & Rear hubs sold - but the actual rear cradle still available and front lower control arms available

hay there i have a series 1 and need fuel rail and injectors if you still have them will they fit my car and how much for them thank you

Genuine limited edition Nismo key + Ignition barrel + door barrels + standard key - $100

if you have still got the above ill take it.

Are any of these goodies you advertised still for sale??

You may not have mentioned some of these, but these are the items I'm particularly keen on....

Interested in 90amp R33 alternator in good nick please

plus passenger door interior trim (perfect or near perfect)

plus boot trim, mat & underfelt

plus electric aerial

plus series 1 drivers side headlight for GTST

Can you advise price & availability please??

I will also send SMS to you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
×
×
  • Create New...