Jump to content
SAU Community

Recommended Posts

Item 1.

5zigen muffler off a R33 GTR, Price $200

a bit dirty in the picture, will clean and polish for buyer.

post-29560-1274699495_thumb.jpg

post-29560-1274699548_thumb.jpg

Sounds more raspy rather than boomy, here's a sample of the sound (excuse the talking in the background)

5zigen_gtr_exhaust.wav

Item 2.

Apexi PFC hand controller, suits R33 GTR, $250

What can i say, it is just a normal PFC controller, in good condition.

Serial no on sticker FCC3 020-16843

Item 3

R33 GTR ECU $150, good for clearing defects.

Item 4

2 actuators from R33 GTR, good for 14 psi, $30 each

the reason this got taken off my car is because I replaced it with the adjustable actuators that comes with the HKS GT-ss when the new turboes were installed.

Item 5

R33 GTS-T actuator $30

Item 6

R33 GTS-T coil pack cover $30

Item 7

http://www.skylinesaustralia.com/forums/Bl...Vr-t200443.html

6 channel amplifier, still sitting in my cupboard since 2008

guys, this is top of the range Blaupunkt amp. bought it in 2004 for $800 and that was on sale, cant remember what the RRP was.

cant really find the old website i got the spec from, but here's an opinion from a car audio site http://www.talkaudio.co.uk/vbb/showthread.php?t=5309

It used to retail for 500 pounds and converted to AUD which buying only 0.4 pounds in 2002 thats a RRP of $1250, well in the UK anyway.

Price drop $350 from $400

If you need more pictures just let me know.

Price is kinda firmish but throw your offer my way.

Location: Melbourne, can be picked up from Yarraville or posted with registered post

I can be contacted on 0402 791 063

I'll try to check this thread everyday.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/322007-stuff-for-sale/
Share on other sites

  • 2 weeks later...
Item 1.

5zigen muffler off a R33 GTR, Price $200 now $150

a bit dirty in the picture, will clean and polish for buyer.

post-29560-1274699495_thumb.jpg

post-29560-1274699548_thumb.jpg

Sounds more raspy rather than boomy, here's a sample of the sound (excuse the talking in the background)

5zigen_gtr_exhaust.wav

Item 3

R33 GTR ECU $150 now $100 good for clearing defects.

Item 4

2 actuators from R33 GTR, good for 14 psi, $30 each BOTH

the reason this got taken off my car is because I replaced it with the adjustable actuators that comes with the HKS GT-ss when the new turboes were installed.

Item 5

R33 GTS-T actuator $30

SOLD

Item 6

R33 GTS-T coil pack cover $30 NOW $20

Item 7

http://www.skylinesaustralia.com/forums/Bl...Vr-t200443.html

6 channel amplifier, still sitting in my cupboard since 2008

guys, this is top of the range Blaupunkt amp. bought it in 2004 for $800 and that was on sale, cant remember what the RRP was.

cant really find the old website i got the spec from, but here's an opinion from a car audio site http://www.talkaudio.co.uk/vbb/showthread.php?t=5309

It used to retail for 500 pounds and converted to AUD which buying only 0.4 pounds in 2002 thats a RRP of $1250, well in the UK anyway.

Price drop $350 from $400 NOW $300

If you need more pictures just let me know.

Price is kinda firmish but throw your offer my way.

Location: Melbourne, can be picked up from Yarraville or posted with registered post

I can be contacted on 0402 791 063

I'll try to check this thread everyday.

PRICE DROP AND BUMPO

throw me an offer guys I'm moving out this Saturday, the less stuff to move the better.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/322007-stuff-for-sale/#findComment-5297308
Share on other sites

  • 1 month later...
Item 1.

5zigen muffler off a R33 GTR, Price $200 now $150 $100

img-resized.png Reduced 82%post-29560-1274699495_thumb.jpg 800 x 533 (186.03K)<script type=text/javascript> //

img-resized.png Reduced 82%post-29560-1274699548_thumb.jpg 800 x 533 (202.68K)<script type=text/javascript> //

Sounds more raspy rather than boomy, here's a sample of the sound (excuse the talking in the background)

music.gif 5zigen_gtr_exhaust.wav ( 628.17K ) Number of downloads: 56

Item 3

R33 GTR ECU $150 now $100 $60 good for clearing defects.

Item 7

http://www.skylinesaustralia.com/forums/Bl...Vr-t200443.html

6 channel amplifier, still sitting in my cupboard since 2008

guys, this is top of the range Blaupunkt amp. bought it in 2004 for $800 and that was on sale, cant remember what the RRP was.

cant really find the old website i got the spec from, but here's an opinion from a car audio site http://www.talkaudio.co.uk/vbb/showthread.php?t=5309

It used to retail for 500 pounds and converted to AUD which buying only 0.4 pounds in 2002 thats a RRP of $1250, well in the UK anyway.

Price drop $350 from $400 NOW $300 $250

throw me an offer, this gotta go. If it doesnt sell im gonna throw it in ebay.

cheers

Link to comment
https://www.sau.com.au/forums/topic/322007-stuff-for-sale/#findComment-5394363
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...