Jump to content
SAU Community

Fs: Rays Gramlights 57s To Suit V35 Coupe

Touge Kyousou
 Share

Recommended Posts

Touge Kyousou Experienced

Touge Kyousou

Posted
Posted

Hi all,

With the recent sale of my V35 sans Rays wheels, i now have my set of Rays Gramlights for sale.

They will fit a V35 Coupe perfectly and imho look best on the pearl white (like i had) due to their dark bronze colour.

The specs are

Front: 18", 8.5 width, +22 offset

Rear: 18", 9.5 width, +22 offset

Perfect width and offset before you need to roll guards etc.

They come with exxy Michelin Pilot Sport PS2 tires (high end UHP stuff).

Front: 245/40 or 45/18, a good few mm off markers

Rear: 275/45/18, a mm or so off markers

And a set of Rays Centre Caps, not installed but easy (just push on lol).

In very good condition. Front passenger has a little finish missing on lip from when tires were put on presumably (no actual metal damage/rash).

Rear passenger has slight rash..forgot about my camber sticking out when pulling out of garage woops!

Price $1600 FIRM. Pickup Sydney St.George area. If you want to buy from interstate that's fine but please organise the courier as i won't have time sorry.

gallery_56118_3384_13184.jpg

More pics of wheels on car in my V35 sale thread here

Disclaimer: The buyer is coming on saturday to pay owing on car and pickup. If this somehow falls through then i will update thread/let potential buyers know i cannot sell wheels until further notice if so.

Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted

The V has gone to a good home.

Wheels are definitely for sale.

I should mention the wheels are a bit lighter than the factory 18"s yet are larger (18x8 vs 8.5 and 9.5!)

Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted

Hey Mark,

I started the price at $32990. Only got scammer interest on CS. Then dropped to $29,999, not much luck there. Then $29,990 and got some interest. Finally dropped to $27,990 where i got alot of interest. I believe the particular combo of factory options and mods on my car helped.

I've seen V's on CS around 30k mark and they take a looonnggg time before they move. Anything over 30k for an 03-04 and it just sits on CS pretty much. Lowest i saw when contemplating and during selling mine was $23k for 03 manual pov pack bog standard in somewhere far-ish away from sydney but was negotiable.

There was one for $23k in syd that sold quite quick soon as it was dropped to $23k.

I got the buyer at the $27990 price point but because they were really nice and didn't want the Rays wheels, i happily sold it for $25,500 (only 1 month rego left but didn't matter as it was interstate) with the factory 18's and down to the marker tires. I think i could've got a better price but i'm of the get it over and done with type of guy so preferred an easy, fast and happy transaction.

GL with it mate.

Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted (edited)

Want these gone - don't fit new toy car and taking up garage space.

$1450!!! For rays engineering wheels in good size/offset and good tires with the centre caps!

I should mention they clear btembos too.

Edited by Touge Kyousou
Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted

Thanks for the compliments guys :thanks:

Everyone's poor ?!? What's going on! Fair enough i had to sell my V because i'm having a child but i went straight out and bought another toy skyline lol :yes:

Someone buy 'em this week pickup only and i'll take $1400 cash - it's really annoying me they can't fit an r33 lol. (st.george area sydney)

Timmi Explorer

Timmi

Posted
Posted
Thanks for the compliments guys :)

Everyone's poor ?!? What's going on! Fair enough i had to sell my V because i'm having a child but i went straight out and bought another toy skyline lol :)

Someone buy 'em this week pickup only and i'll take $1400 cash - it's really annoying me they can't fit an r33 lol. (st.george area sydney)

my budget has gone to getting new tyres first......

mine are sliding all over the place...

  • 2 weeks later...
Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted (edited)

Hey all,

These rims are back up for sale.

The previous buyer is returning them due to a very silly mistake on my behalf. He checked the stickers for the fronts and they were actually +30 offset. Rears however are indeed +22 offset.

So i will have these again this sunday night (20th).

Price $1300

Edit - he hasn't installed them, he was cleaning the wheels and noticed the sticker, cheers.

Edited by Touge Kyousou
Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted (edited)

I should've added this...

These wheels are advertised on here SAU and 350z-tech forums so it will be first in first served via reply on thread/PM/SMS.

Thankyou.

Edited by Touge Kyousou
Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted (edited)

These wheels are now back in my garage and i would like to move them to make space. They are in very good condition.

F: 18x8.5, +30, 245 tires

R: 18x9.5, +22, 275 tires

Price $1250 firm, come get them.

Pics of individual wheels:

Fronts

gallery_56118_3384_65765.jpg

gallery_56118_3384_31464.jpg

Rears:

gallery_56118_3384_32375.jpg

gallery_56118_3384_63484.jpg

Edited by Touge Kyousou

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • Murray_Calavera
      iPad gauge cluster

      By Murray_Calavera · Posted

      First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...