Jump to content
SAU Community

Recommended Posts

Hey All,

Got a few bits and pieces laying around that I can definitely do with selling now.

Any questions on anything feel free to ask me.. Now for the items.

-RB26 from a 93 model 32, this currently has a sump to suit rwd application, comes complete with both turbos, and the entire intake side of things.

This was from my running 32 which made way for the new engine. $4000 ono

-rb26 gearbox, this has a bellhousing for a pull type clutch. The gears look fine as I swapped the bell housing on the gearbox at one point. $500ono

-r34 brembo's and slotted discs FRONTS only. I don't need these any more due to having AP's now. the rotors have only been used for about 2000km, pads are Project MU pads.

The calipers are in good condition, a couple of littles scratches in the gold paint but nothing too bad. $1500ono

-r32 stock front mount cooler. good condition, again left over item off my running 32, made way for a bigger cooler. chasing $350? ono?

i also have the stock piping to suit a 32 gtr if needed as well

-nismo gmax twin plate clutch to suit pull type gearbox, has a little bit of meat left on the friction pads but i would suggest getting it rebuilt first. $300. ono.

If you badly need pictures of what an rb26 engine or gearbox looks like please let me know.

Don't have any pics of the cooler at the moment, will chuck one up in the next day or so.

contact me:

0421933614 - if you call and i don't answer, leave a message and i will call back.

[email protected]

or PM me on here.

All items are located in carindale, brisbane and I am more than happy to ship interstate at the buyers expense.

post-39837-1275139296_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/322699-gtr-stuff-for-sale/
Share on other sites

BUMP.

Still for sale is:

GTR gearbox - $500 ono

late model 32 rb26 - $4000 ono

stock r32 FMIC - $300 ono

nismo gmax twin plate clutch - $300 ono

Also have things like a unused HKS ssqv with flange, rb26 wiring harness.. odd bits and pieces here and there.

interested in the hks ssqv if its for sale? will it fit stock rb25det intake pipe?

yeah ssqv is for sale, but no it's not a direct bolt on, the flange i got with it was the weld on one.

Clutch sale fell through. So is now available again.

ITEMS STILL AVAILABLE

GTR gearbox - $500 ono

late model 32 rb26 - PRICE DROP - NOW $3500 ono

stock r32 FMIC - $300 ono

Nismo GMAX pull type clutch - $300 ono

Located in brissie... km's are 116138, if you want to believe that on a 93 model gtr out of japan is up to you? however the engine was running fine, and did a 12.4 on willowbank just before i pulled it out to make way for the new engine.

Located in brissie... km's are 116138, if you want to believe that on a 93 model gtr out of japan is up to you? however the engine was running fine, and did a 12.4 on willowbank just before i pulled it out to make way for the new engine.

mate can you please send me a couple of photos or the motor alone and what has been done to it. and anything else you would want to add. im keen but would like more info cheers bud!

mate can you please send me a couple of photos or the motor alone and what has been done to it. and anything else you would want to add. im keen but would like more info cheers bud!

PM sent.

Located in brissie... km's are 116138, if you want to believe that on a 93 model gtr out of japan is up to you? however the engine was running fine, and did a 12.4 on willowbank just before i pulled it out to make way for the new engine.

Man can you please pm me or text 0404978150 with ya best price for both the box and clutch setup.. cheers

Engine, clutch and FMIC still available.

Hey mate, just wondering why did you pull this engine out if it was runnin fine? Oh and please post some pics of the engine I'm intested but just want to make sure its runing ok??

Cheers

Dave :cool:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...