Jump to content
SAU Community

Fs: Sard/denso 850cc Injectors Rb25det

disco_potatoe
 Share

Recommended Posts

disco_potatoe Rising Star

disco_potatoe

Posted
Posted (edited)

For sale is a set of Sard/Denso 850cc side feed injectors. they are in good condition. reason for selling is got an EPA test and going back to stock and after that going to go bigger injectors again to make more power.

so i'm asking $600ono + postage, as these are $1080.00 brand new so i think my price is fair.

any questions please pm me and i will reply asap thanks!

post-64908-1275451879_thumb.jpg

Edited by disco_potatoe
disco_potatoe Rising Star

disco_potatoe

Posted
  • Author
Posted

So everyone knows these injectors were flow matched when bought new... N also can people stop offering $100 I want more than that!!!!

If u need more pics please let me know...

Thanks matt!

disco_potatoe Rising Star

disco_potatoe

Posted
  • Author
Posted

All u need is to take out ur old injectors from ur stock rb25det fuel rail and places these injectors in there spot... As for the wiring all u need to do is get a set of new plugs and get the person who is going to tune the car to connect them to ur stock wiring loom... Brand new plugs are $8 each off eBay for denso injectors times that by the number of injectors (I.e six injectors) and then get ur car tuned... That's all...

Is there something else you would like to know?

Thanks heaps!

Btw there still for sale!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...