Jump to content
SAU Community

Recommended Posts

dudes got my hands on this pump, but dont know wat is or out of.

try to attach pics, it has these numbers on it, can anyone identify them. my guess is its a gtr pump....maybe

A42-621B70

12V 8Y09

UNISIAJECS

I dont know how old it is so if u guyz had the choice wud u use this one or buy a new bosch. I have heard it running and it has noticeable whinning so i dont know if its signs of old age or normal for the pump. it looks ok but not sure .

i need to change my standard pump on my r32 gtst and was hoping to use this one.

thanx

jay

Link to comment
https://www.sau.com.au/forums/topic/32335-feul-pump-question/
Share on other sites

All I can tell you is that from the looks of it, its a GTR/Z32 pump. the older ones have black rubber around them, but otherwise look identical. The diaphram at the top gives it away.

Some what stabbing in the dark now, but the R32GTR/Z32 ones have black rubber, the R33 ones dont, as per the photo you have up.

I must qualify and say that I have only ever seen about 8 or 10 of these before, so I am not 100% sure. It will probably make less noise when it is in the tank and has fuel to suck. Should be good for around 250rwkw.

  • 4 months later...

i found the pump is a r32 gtr pump. the gtr pump has a round 20cent size diaphram sitting on a angle at the top. gtst pumps dont have this at the top. also found out it was really noisy cauz the pump was cable tied directly on the bracket meaning metal on metal contact and the metal braket sits on the metal fuel tank hence the noise !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...