Jump to content
SAU Community

Fs Complete: R33 Mspec Rb25det Manual

PIOTREK
 Share

Recommended Posts

PIOTREK Proficient

PIOTREK

Posted
Posted

VIV: NO VIV required, this car is not written off.

Any who is handy with panel beating has a good opportunity to fix this car.

Vehicle: 1994 Nissan Skyline

GTS-T MSPEC (series 1) RB25DET

Transmission: Manual

KM: 183, 000

Colour: Burgundy

Location: VIC S/E Car is currently in Blackburn in my garage; however I live in Narre Warren so I will require some notice in order to inspect the car.

Brief Comments: Originally I was looking at selling the car as complete in the upcoming months, however recently I have had a very minor accident and now l'm looking at selling the car as is. Prior to the accident the car was immaculate and only required new windscreen wiper blades for RWC. This was conducted during a very brief inspection last time it was in the shop (fitting my exhaust). Owned by mature owner and the car has never missed a beat. Currently the car starts and drives, however it has a leaking radiator.

Registration: Currently the car is register till FEB 2011 (selling as is, no RWC or REG, happy to discuss arrangement further with buyers)

Overview of Damage (pictures below):

Replacement parts required-

Front bar plus re-enforcement bar

Bonnet

Head lights (both, as clips are all broken)

Grill

Radiator, very minor leak but must be changes

Photos are attached of the radiator support panel; this does not need to be changed. Easily repaired!

Impact was done at a very low speed and I included a photo of the black Kia to show what damage I done to her.

List of modifications/ aftermarket parts:

Yellow Jacket Coil packs

Adjustable whiteline caster rod bushes, tie rod ends

New-ish shocks and springs- slightly lower but legal and doesn't scrap everywhere. It was fitted as the original ones no longer have it that tight feeling.

17inch light weight ssr rims (white)- (80% tread all round around Ventus and )

3inch (or 3.5) KatiMoto exhaust with high flow cat. CAT was fixed about 2 months ago

Pod Filter

Viper Alarm with pager

Veil side (legal) steering wheel

Car Condition/ history:

Car is (was) immaculate and I am a really fussy owner. I have owned the car for approximately 3.5yrs and in that time I always ensured the car was running perfectly and never held back on maintenance expenses. The previous owner was the original first owner is Australia and had the car for 3 years. Mechanical you could not fault the car. Car blows no smoke at all and never been boosted. Inspection will not disappoint.

Recently replaced- gear box, diff, Coolant, Engine oil and fitted new EBC green brake pads.

Price (NEG):

With Wheels- $4,500

Without- $3,500

In no hurry to sell as the car is locked up in the garage so no ridiculous offers, however happy to discuss the arrangement (via the phone) with serious customers.

More photos can be found in the FS section-

http://www.skylinesaustralia.com/forums/R3...ec-t323432.html

post-48038-1275563842_thumb.jpg

post-48038-1275563892_thumb.jpg

post-48038-1275563926_thumb.jpg

post-48038-1275563968_thumb.jpg

post-48038-1275564028_thumb.jpg

PIOTREK Proficient

PIOTREK

Posted
  • Author
Posted

hey alex, nice to hear from u mate. you are correct there is definately a good opportunity for someone here. Even if you want it for parts, start and drive the car to make sure its wat you want. Apart from the light panel work car is perfect.

PIOTREK Proficient

PIOTREK

Posted
  • Author
Posted

I want the car gone this weekend, otherwise i will be interstate for 2 weeks. I'm not keen on text messages, please call if you are interested.

Reasonable offers only please.

Current price is without reg, but if you can tell me how you are going to transfer the car in your name without a RWC then we can talk further.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Tein Circuit Master- rebuild worth it?

      By MBS206 · Posted

      If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • MBS206
      Best place to order Authetic R32 Parts in Japan

      By MBS206 · Posted

      Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • MBS206
      NC MX5

      By MBS206 · Posted

      Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • MBS206
      Blue slip

      By MBS206 · Posted

      I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...