Jump to content
SAU Community

Rays Gram Lights 57f Pros 18x8+30 & 18x10.5+22

fantaskis
 Share

Recommended Posts

fantaskis Apprentice

fantaskis

Posted
Posted

18x8 +30s on the left 18x10.5 +22 on the right.

wheels.jpg

IMG_0437.JPG

IMG_0439.JPG

rear_gl.jpg

gl.jpg

These were originally for my Z32 but never got to fitting them, now I feel like something new for the JZX100.

The 18x8s are brand new, and the 18x10.5s are in perfect condition. I had the rears color matched to the fronts and had a couple of minor blemishes touched up at the same time, so they're in new condition as well.

Priced to sell - $2200 (i paid over 900 a rim) or $2600 with Yokohama Advan 235/35 + Kuhmo 265/35 tyres.

I'm located on the Sunshine Coast QLD. Can do pickup or courier at your expense.

GUN_METAL_GTR32 Grand Master

GUN_METAL_GTR32

Posted
Posted

beck u will need to pump the f**k out of ur guards to fit these under neath.

the fronts will fit with no problem at all

the rears are another story

fkn odd staggering

if they were 9.5 front and 10.5 rear i would have bought them

RusH_ Veteran

RusH_

Posted
Posted
Can anyone confirm if these will fit my R34 Gtt??

Im running full Cusco Coilovers & Ajustable arms etc..

Any help with this would be greatly appreciated

Pretty sure you'll need guard work for the rears, fronts should be fine

edit: beat me to it julz lol

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • Dose Pipe Sutututu
      RB25DE NEO with Haltech ECU

      By Dose Pipe Sutututu · Posted

      post up screen shots of your injector tables
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...