PM-R33 Posted June 13, 2010 Share Posted June 13, 2010 (edited) Before you even start going through any big modification process I say you spend the next month or so reading as many threads on this site that you can because you are very limited in knowledge (hell we all were at one stage) and If I was you I would try to get as much knowledge under your belt before you go down this road so you don't waste money. The first year that I had my car I didn't do many modifications (was still in year 12 and had no cash) but I spent nearly ever night reading and researching what everything was and what parts did what. Best help I ever had was SAU, I suggest you use it to your advantage. All the information you could ever want is on this site so just have a search for it. Not sure what a Z32 AFM is? Spend a few hours searching it and reading, then you will know one extra thing. Not sure what the benefits of an aftermarket ECU are? Same thing, start searching brother. Edited June 13, 2010 by PM-R33 Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290797 Share on other sites More sharing options...
TMW-R34 Posted June 13, 2010 Author Share Posted June 13, 2010 Soon as you changes things like AFM, injectors = retune.If you are on a tight budget, then simply you shouldn't even be aiming for 300rwkw to be honest. Settle for 250rwkw give/take with a bolt-on hi-flow turbo and just drive it itll be 250-270 at the very most. Is it possible to bolt on a bigger turbo having a front mount and leave it until i get more dosh, or is that not such a good idea?? When i do get the money, get the injectors,pump, afm and nistune all done in the same week??? Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290798 Share on other sites More sharing options...
joeyjoejoejuniorshabadoo Posted June 13, 2010 Share Posted June 13, 2010 You will need power fc or nistune or other ecu you need to tune every time you change things like turbo, injectors, afm best bet is to get all the parts and do it at once You can not just drive it around half assed as this will cost you your motor.... That's if it even runs Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290802 Share on other sites More sharing options...
TMW-R34 Posted June 13, 2010 Author Share Posted June 13, 2010 Before you even start going through any big modification process I say you spend the next month or so reading as many threads on this site that you can because you are very limited in knowledge (hell we all were at one stage) and If I was you I would try to get as much knowledge under your belt before you go down this road so you don't waste money.The first year that I had my car I didn't do many modifications (was still in year 12 and had no cash) but I spent nearly ever night reading and researhing what everything was and what parts did what. Best help I ever had was SAU. yeah id do anything to gain some knowledge about all this. Just trying to get the corect order to have things done. Have been on here all day reading threads. Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290805 Share on other sites More sharing options...
TMW-R34 Posted June 13, 2010 Author Share Posted June 13, 2010 You will need power fc or nistune or other ecuyou need to tune every time you change things like turbo, injectors, afm best bet is to get all the parts and do it at once You can not just drive it around half assed as this will cost you your motor.... That's if it even runs Ok thats what i wanted to know, get what i need, put it all in at once and have a first and final nistune. Following now. Thankyou Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290811 Share on other sites More sharing options...
paulr33 Posted June 13, 2010 Share Posted June 13, 2010 your looking for a cheaper alterantive to a stand alone and you want 500rwhp or 500hp ? i think you really need to write down on paper a) what you want b) how much you plan to spend the two will never match at this rate forget about solution mode for 10 minutes, really plan what you want you're getting way too far and quick into solution mode next up youll be bidding on ebay auctions for random kits and bolt on stuff that wont work Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290896 Share on other sites More sharing options...
TMW-R34 Posted June 13, 2010 Author Share Posted June 13, 2010 (edited) your looking for a cheaper alterantive to a stand alone and you want 500rwhp or 500hp ?i think you really need to write down on paper a) what you want b) how much you plan to spend the two will never match at this rate forget about solution mode for 10 minutes, really plan what you want you're getting way too far and quick into solution mode next up youll be bidding on ebay auctions for random kits and bolt on stuff that wont work Im aiming for about 350-360hp at the wheels and planning to spend about 4 grand. Was thinking a garrett gt3076, nismo 480cc injectors, bosch z32afm, intank fuel pump, trying to find 1 at the moment, any recomendations would be great. And nistune at the end of it. Planning to put it all in at once and be done with it rather then messing around with it. Edited June 13, 2010 by TMW-R34 Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290960 Share on other sites More sharing options...
paulr33 Posted June 13, 2010 Share Posted June 13, 2010 i still think 360rwhp will cost you 10k in parts, labour, tune drive in and jive away Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290980 Share on other sites More sharing options...
TMW-R34 Posted June 13, 2010 Author Share Posted June 13, 2010 i still think 360rwhp will cost you 10k in parts, labour, tune drive in and jive away a mate of mine knows his shit and has the same car, so he'l be able to install everything, all i would need to get done is the nistune. That should have dropped the price considerably id imagine?? Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5290993 Share on other sites More sharing options...
paulr33 Posted June 13, 2010 Share Posted June 13, 2010 yep go for it, there are a number of power threads from your skyline, all of the good info is in those threads do some reading for a few days / weeks and collect all of your info Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5291011 Share on other sites More sharing options...
PM-R33 Posted June 14, 2010 Share Posted June 14, 2010 (edited) I don't think 4k will cut it unfortunately. I can't remember what modifications you said your car had and I can't be bothered reading through it all so just take away what you have: Cat-back and dump pipe - $800-$1200+ FMIC - $500-$1000+ GT3076 -$1700-$1900 Clutch $500-$1000+ Injectors - $800 Fuel pump - $200-$450 Nistune - $400 Z32 - $200-$300 Tune - $500-$1000 Splitfire coilpacks - $650 Boost controller - $50-$800 This is assuming you are going an internal gate setup, if going external gate it's obviously going to be more for a gate and manifold. So in parts alone you are looking at $6300-$10000+ depending on what exact parts you allready have and depending on what quality gear you want to get. This is with no labour for anything, no fluids/service you will need to do. Plus all the little costs that start adding up when you need something or something breaks during installation. Trust me, it happens. So like I said if you want to do it, plan to spend more than $4000 or you will get a bit of a shock once it all starts adding up. Edited June 14, 2010 by PM-R33 Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5291572 Share on other sites More sharing options...
joeyjoejoejuniorshabadoo Posted June 14, 2010 Share Posted June 14, 2010 Standard rule with car modding double the cost and tripple the time... Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5291752 Share on other sites More sharing options...
PM-R33 Posted June 14, 2010 Share Posted June 14, 2010 Lol so true man. Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5291755 Share on other sites More sharing options...
TMW-R34 Posted June 14, 2010 Author Share Posted June 14, 2010 I already have the front mount, clutch, 3 inch turbo back exhaust, boost controller and yellowjackets coilpacks. And a mate is able to do all the rest and all that needs to be done is the nistune. So allowing 4 grand for whats left i was thinking would be ok?? Dont mind too much if the price does go over the limit a little tho. Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292118 Share on other sites More sharing options...
Randon_I_Am Posted June 14, 2010 Share Posted June 14, 2010 Before you even start going through any big modification process I say you spend the next month or so reading as many threads on this site that you can because you are very limited in knowledge (hell we all were at one stage) and If I was you I would try to get as much knowledge under your belt before you go down this road so you don't waste money.The first year that I had my car I didn't do many modifications (was still in year 12 and had no cash) but I spent nearly ever night reading and researching what everything was and what parts did what. Best help I ever had was SAU, I suggest you use it to your advantage. All the information you could ever want is on this site so just have a search for it. Not sure what a Z32 AFM is? Spend a few hours searching it and reading, then you will know one extra thing. Not sure what the benefits of an aftermarket ECU are? Same thing, start searching brother. +1 about one year ago i bought a bog stock r34gtt and had no experience with turbo cars what-so-ever, then stumbled onto this awesome site and started a massive learning curve I've gone from no experience at the start and now driving around in an awesome feeling 266rwkw GTT, just went to metal intake/pod today and should see 280rwkw hopefully. All work appart from tuning done myself. So read, read and read some more and take in all the advice ya can. Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292214 Share on other sites More sharing options...
TMW-R34 Posted June 14, 2010 Author Share Posted June 14, 2010 400rwhp = 300rwkw = GT3076/.82Done. Is this turbo a direct bolt on for the 25detneo??? Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292235 Share on other sites More sharing options...
JonnoHR31 Posted June 14, 2010 Share Posted June 14, 2010 no Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292634 Share on other sites More sharing options...
TMW-R34 Posted June 14, 2010 Author Share Posted June 14, 2010 no No what mate?? Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292648 Share on other sites More sharing options...
JonnoHR31 Posted June 14, 2010 Share Posted June 14, 2010 no its not a direct bolt on Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292650 Share on other sites More sharing options...
TMW-R34 Posted June 14, 2010 Author Share Posted June 14, 2010 no its not a direct bolt on Ok,what modifications need to be made. Are there any turbos out there that are a direct bolt on upgrade rated at around 450hp .82IW ?????? Link to comment https://www.sau.com.au/forums/topic/324609-500hp/page/3/#findComment-5292661 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now