Jump to content
SAU Community

Recommended Posts

Hey everyone

I have got a 2way Cusco diff and would like to buy some oil. On their website they say use an oil with a viscosity of 80w-140.

I rung up the local workshops(Xspeed, Intune, cypher industries, Nissan).

Xspeed said they will ring me back, cypher industries said they have redline oil however they recommend to use a 75w-90 because 80w-140 is to thick.

Intune and Nissan both just dont stock any of those oils, Nissan dosnt stock Nismo oil either.

So i just wanted to know what viscosity should i stick to? 80w-140 or as recommended by the workshops 75w-90? The car is going to be used on the track and also as a daily.

Finally does anyone know who in Perth holds redline, motul or nismo oil to buy?

Cheers guys, ni

Link to comment
https://www.sau.com.au/forums/topic/324793-where-to-get-oil-for-diff/
Share on other sites

Hey everyone

I have got a 2way Cusco diff and would like to buy some oil. On their website they say use an oil with a viscosity of 80w-140.

I rung up the local workshops(Xspeed, Intune, cypher industries, Nissan).

Xspeed said they will ring me back, cypher industries said they have redline oil however they recommend to use a 75w-90 because 80w-140 is to thick.

Intune and Nissan both just dont stock any of those oils, Nissan dosnt stock Nismo oil either.

So i just wanted to know what viscosity should i stick to? 80w-140 or as recommended by the workshops 75w-90? The car is going to be used on the track and also as a daily.

Finally does anyone know who in Perth holds redline, motul or nismo oil to buy?

Cheers guys, ni

Either 75/90 or 85/140 will be OK. Make sure it is a LSD oil. I believe most aftermarket diffs require a mineral oil, I know Kazz recomend mineral and say to avoid synthetics.

What does the Cusco instructions say?

Hey guys

I think ive found the oil i am after which is the Motul 90PA Differential Oil..

Was reading a few threads on forums that had people talking about the Cusco 2ways and they found the Motul 90PA Differential Oil to be the best solution. It's a mineral based oil also..

Has any one else used this on there diff, if so how would you rate it?

thanks for all the help :D

Ni

No problem if you don't mind the extra wear and noise
I use Castrol saf xa 75w90 in my cusco 2 way.

Drives mint.

Can get it from most auto shops

Hey guys

Hmm i have no idea now which oil to choose. i say this because im getting a 50/50 opinion where some people state that the75w-90 is the best option, then other people say use a thicker oil such as a 80w-140.

cypher industries said that the 80w-140 will be to thick for a car that is also used on the road and that when i come into tight turns it may be to tight, hence why Zac said to go a thinner oil such as the 75w-90..

But then in the cusco website they state a 80w-140, so all in all im more confused about what oil to get then i was before.

I looked at the Motul range (as ive heard they work great with the 2ways) however the Motul 90PA is the only one which is mineral based. the 75-140 oils are all fully synthetic.

No problem if you don't mind the extra wear and noise

Hey Steve

I am leaning towards the 80-140, 85-140 viscosity

Using an oil with such an viscosity in your diff have you found any problems when coming into tight corners or round about?

Cheers, ni

Hi Ni,

Now you are coming to what can be a frustrating but also rewarding part if owning a performance car

i.e. Knowing what suits your purpose best.

Best option IMO is do some r&d yourself - diff oil isn't too expensive, so try the 90 weight Motul, see what

you think, then try the 140 weight and do the same - that way you will know what is best for YOU

and don't be scared of synthetic oils, synthetics count amongst some of the best in the world, also, not all oils are created equal, some 140 weight oils will give alot better results than others (I have used both valvoline and a

couple of different castrols) I have also used 90 weight, but changed it

out about 2 days later cos I didn't like it

as for roundabouts/tight corners, you will most likely find the diff will lock and the tyrese chirp, or if you are just rolling around, the diff may clunk a little (I have found this is worse with lighter oil than heavier, the heavier oil quirtens down the diff - on the ones I have used anyway)

FFS its all the same! dosen't matter what brand, make sure its mineral and is suitable for LSD. Then chose your viscosity! All the viscosites mentioned in the above posts will be OK.

For gear oils most oil companys use the similar additive packs and the base oils usually come from the majors ie Mobil, Shell, BP. So any reputable brand will be fine. Dont get carried away with brand names, do you really think so called specialists like Motul, Redline, Royal Purple invest more money into research than regulars Mobil, Shell, Castrol and so on? I dont think so!

Ash

Hi Ni,

Now you are coming to what can be a frustrating but also rewarding part if owning a performance car

i.e. Knowing what suits your purpose best.

Best option IMO is do some r&d yourself - diff oil isn't too expensive, so try the 90 weight Motul, see what

you think, then try the 140 weight and do the same - that way you will know what is best for YOU

and don't be scared of synthetic oils, synthetics count amongst some of the best in the world, also, not all oils are created equal, some 140 weight oils will give alot better results than others (I have used both valvoline and a

couple of different castrols) I have also used 90 weight, but changed it

out about 2 days later cos I didn't like it

as for roundabouts/tight corners, you will most likely find the diff will lock and the tyrese chirp, or if you are just rolling around, the diff may clunk a little (I have found this is worse with lighter oil than heavier, the heavier oil quirtens down the diff - on the ones I have used anyway)

Hey dude

Thanks for all the information man, will try out a few oils and see how it goes from there.

Ni

FFS its all the same! dosen't matter what brand, make sure its mineral and is suitable for LSD. Then chose your viscosity! All the viscosites mentioned in the above posts will be OK.

For gear oils most oil companys use the similar additive packs and the base oils usually come from the majors ie Mobil, Shell, BP. So any reputable brand will be fine. Dont get carried away with brand names, do you really think so called specialists like Motul, Redline, Royal Purple invest more money into research than regulars Mobil, Shell, Castrol and so on? I dont think so!

Ash

no. i never said anything about a brand name however i read reviews and most guys on forums such as Skyaus, Hardtuned post good reviews

on the motul range, HENCE why i asked about it! not because i like the name nor care. i will go for a Mineral based oil as stated.

thanks, ni

Hey everyone

Alright guys I’m going to try two oils out.. Firstly i went for the Motul P90A because 1) there’s been positive feedback saying they are great in the Cusco 2ways and quieten them down without it slipping. 2) The original owner of the diff said he used the Kaaz 2way oil which is a 80w-90.

i will run the motul oil first, if it seems to be an issue i will change over to the higher viscosity Castrol LSX 85W 140 and try that as Steve stated.

Thanks for all your input guys

Ni

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...