Jump to content
SAU Community

Recommended Posts

Hi guys, up for sale is a set of light-weight 17" Work Wheels J-Wing DT-01 Edition. Located in Melbourne, however willing to help with interstate shipping too if needed.

I'm open to swaps as well, interested in 18" wheels + cash adjustment either way. Show me what you have guys.

Price: $1800

The specifications of the wheels are :

Front: 17x 8+ 35

Rear: 17x 9 + 38

Comes with 4 tyres with plenty of thread left, minimum of 80%

Front tyres are 235/45/17 Zeetex brand

Rear tyres are 255/40/17 Bridgestones

These Work Wheels are in excellent condition, with no buckles, gutter rashes or dents. They have polished lips with decent amount of dish, comes with all 4 WORK centre caps too. Theres only one spot of very slight gutter rash on the rear left wheel's lip (about 2cm) . All the other 3 wheels are perfect, like new.

Contact me via PM or drop me a text message at 0420242724.

sidecar.jpg

frontwork1.jpg

Workrear2.jpg

Workrear1.jpg

Rear1.jpg

Picture of the 2cm gutter rash, easily fixed if you're fussy about it, otherwise its hardly noticeable

rearlip.jpg

Work Logo

Worklogo2.jpg

Work Centre caps

workcap-1.jpg

Rear3.jpg

Edited by Brabus
Link to comment
https://www.sau.com.au/forums/topic/325702-17-work-j-wing-wheels-tyres/
Share on other sites

I am now accepting any offers. My new wheels has arrived and I would like these Work wheels to be sold soon.

Throw me any offers, i might just accept it. Grab yourself a bargain on a set of lightweight quality Work Wheels with tyres!

Bump

Edited by Brabus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...