Jump to content
SAU Community

Is My Timing Belt On The Way Out?

brodie_84

By brodie_84,
in General Maintenance

 Share

Recommended Posts

brodie_84 Contributor

brodie_84

Posted
Posted

I just picked up an R33 gtst s2. It needed a new diff and radiator so I've just finished replacing those and today I just noticed a slight whirring noise, which I think is coming from the timing belt cover.

Has anyone had this noise before? It only does it just off idle then it's fine after that. I've already ordered a new timing kit and water pump today which I'll fit on Friday, and hopefully that fixes it.

The motor has done just over 100,000kms so I'm gonna play it safe and replace the belts and pulley, and water pump while I'm at it.

Link to comment
https://www.sau.com.au/forums/topic/325911-is-my-timing-belt-on-the-way-out/
Share on other sites
Kinks Grand Master

Kinks

Posted
Posted

100k service = change timing belt. you're due so change it, interference motor means things get ugly if it snaps.

aftermarket belts eg gates make some noise anyway, but if yours hasn't been done and it's the OEM belt then it could be a warning sign that you should change it!!

i never heard a peep out of my OEM belt, got a gates on there now and it does make a slight whirr just off idle but they often do that.

brodie_84 Contributor

brodie_84

Posted
  • Author
Posted

Yea I'm prayin it's only the timing belt. I bought the car off a mate and he was straight up with the few things that were wrong with it and he did mention the timing belt hasn't been done yet. The motor sounds perfectly smooth, only the slight whirr just off idle. My parts should get here Thursday, so I should have it all completed by Friday arvy. I'm massively keen to get it on the road but don wanna playin Russian roulette n end up blowin the motor by drivin it with the old belt.

Andy R33 GTS Apprentice

Andy R33 GTS

Posted
Posted

Hey guys, I am having the same issue ....HOWEVER,

my 96 R33 GTST (100km covered), was due for a timing belt, especially as I only just got the car a few months ago and didn't know if its been done.

I bought a timing kit, had it fitted, and within 2 weeks I am getting a whirr/growl from top of timing cover,

the noise only happens a few hundred RPM over idle and goes when revved higher, I have noticed that the growl goes once its warm (after a few mins) but have also notice when quite hot... I am getting a high pitched groan/moan from the same area.

Is the idler bearing shot? or tensioner? or is it just a noisy belt?

My other concern is that the tensioner has been set too tight and its worn the bearings ... is this possible?

Note, The noise wasn't there before the timing belt was done. :down:

Muchly appreciated if anyone else can shed some light?

Andy

Andy R33 GTS Apprentice

Andy R33 GTS

Posted
Posted
New belts usually do that before theyre settled in, If it's a Gates timing belt, completely normal, might need retensioning down the track if it still does it

So a little growl just above idle for a few minutes is normal?

will it quieten down with age? Is this the same for the hum/whine when it is warm?

Thanks

brodie_84 Contributor

brodie_84

Posted
  • Author
Posted

so, i changed the timing belt yesterday and changed the tensioner and idler pulley while i was at it. The water pump was weeping out of the 'tell tale' hole so i replaced it as well.

It would have been approximately a 4 hour job, but my mate that was helping me accidently snapped off one of the 6mm bolts that holds the top timing cover on. Then it turned into a big mission to find a small enough ezi-out kit in town. And in the end I ended up drilling out the bolt and tapping it to an 8x1.25 hole instead and now its all sweet.

Anyways, now the new belt is fitted, the whirring noise that was there before, is now completely gone :-)

There is now the higher pitched whining/whirring noise... which is obviously characteristic of a new timing belt until it runs in.

But other than that, everything looks fine.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...