Brand New Siemens 890cc Ev1 Injectors

[rbr31andrew]

Set of 6 x Siemens 890cc EV1 injectors. 14mm o'ring, will suit a large range of applications!

Brand new injectors! $400 Posted.

PM me if you are interested or email me at [email protected]

[1KNG2C]

would they fit a rb25? were r u located and can u msg me the best price 0422660086

thanx mate

[s2d4]

you'd need to modify your fuel rail or get some 14mm ones... I don't think those are side feed either so yeah..

would they fit a rb25? were r u located and can u msg me the best price 0422660086

thanx mate

[rbr31andrew]

There top feed.

You would need a aftermarket rail to suit.

• 
  

• Siemens Racing Injector, designed for Aftermarket Performance Applications

  
  

• Suitable for 175HP per injector in Non-Turbo Applications

  
  

• Suitable for 139HP per injector for Turbo and Supercharged Applications

  
  

• 83 lb/hr (890cc/min)

  
  

• 14mm O'Ring

  
  

• Low Impedance (2.2ohms)

  
  

• Uses Bosch Style Square Connector (EV1)

  
  

• Also Suitable for Alcohol (Methanol)

  
  

• Price is per injector

  
  

Siemens Part # FI11405 (old P/N 3105) (Commonly known as Siemens 83's)

All tests run with n-Heptane (0.6855g/mL) @ 20^oC (+/-1^oC), 3.0 Bar (+/-0.01 Bar) (43.5PSI) , 14VDC (+/-0.05VDC), peak/hold driver. Gas (0.735g/mL) ratings converted at a 1.035:1 ratio.

Static Flow Rate: 83.2 lb/hr = 10.87g/s = 888 cc/min (+-/ 4%)

Dynamic Flow Rate 2.5ms PW @ 100Hz: 19.5mg/pulse (+/-4%)

Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required)

Spray Pattern: Pencil

Connector: Minitimer (Bosch EV1)

[rbr31andrew]

[rbr31andrew]

No longer Needed! Grab a bargain.

[lukesz]

are these a straight fit into a rb26 stock rail?

[s2d4]

No.

[rbr31andrew]

I also have for sale...

2 x Proflow Billet 30micron inline Fuel filters with -6 male ends

$40 Posted For the Pair!

[rbr31andrew]

Must go.. ready to send!

[rbr31andrew]

Injectors and Filters $400 Posted

[rbr31andrew]

Bump