Jump to content
SAU Community

Recommended Posts

I have a Bosch High Flow/High pressure fuel pump only been used for a few months already fitted to in tank fittings and wired up.

Numbers on pump are 0580254040 12V 586-22

$75.00

A set of 6 high flow injectors, side feed off a rb25det, in rail, or can sell seperatly, still reaserchin the exact specs they are red in colour.

$200

Rear bumper reo bar good condition straght $20.00

Front bumper serries 1 with indicators and park lights, i used it to get through road worthy a few times without a hassle. is skyline white, then sprayed spray can white over the top then spray black over that. looks shit but works well to pass a road worthy

$40

Hicas lock bar, few dings in it but will still work well $30.00

r33 rb25det air con compressor worked well no leaks $20.00

r33 fuel flap white in colour $20.00

Rear 17 tyres inner sholder is worn but rest is ok free

Can post all items items at buyer expence.

0425354614

or pm

Edited by goldgem
Link to comment
https://www.sau.com.au/forums/topic/326382-fs-sa-r33-few-parts/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...