Jump to content
SAU Community

Recommended Posts

i have to find a spare set of headlights and try...

You can do it straight away, just be carefull. Ballasts fit inside headlights easiely

can you pm me regarding to what type of oven, degrees and how long etc.

I can't send PM yet but you can send me you e-mail

Nick

Edited by Nicko_2010
  • 1 month later...
PM for pricing and info!!! :blink:

Not that i have my 350 GT yet but angle eyes are awesome, i did them on my R6, i used hair dryer and slowly heated up the glue around the whole lens edge, then reheat as u put back together.

IMG_4013.jpg

and

IMG_3419.jpg

(not the best pic from straight on but they look awesome in real life !! )

And these kits are now under like $55USD delivered.

I will be doing mine straight away :D

  • 3 months later...

SO after buying Boscos old headlights i decided to do my own custom LED install

Took the lights apart using a heat-gun about 2 flat head screwdrivers and lots of patience

Once opened i painted the silver cover using Gloss Black Caliper paint (heat resistant)

then i installed the LED strips as halos

opened the side park light and had to cut the clear plastic inside to be able to fit in the LED strip

connected them all to where the strip bulb would connect and put them all back together

here are some pictures for you all

post-71983-1290946256_thumb.jpg

post-71983-1290946326_thumb.jpg

post-71983-1290946360_thumb.jpg

post-71983-1290946456_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...