Jump to content
SAU Community

Bee-r Rev Limiter/ R32 Cusco Camber Ams, Lowered Springs+shocks, Roll Cage Front, A/c, Wings, Rims+tyres


Recommended Posts

Bee-r revlimiter hardly used, in my car for fun and launch control. All works perfect, comes with crazy illustrated jap instructions and all ecu print outs. $300 posted anywhere in aust

Standard injectors (blue) out of my rb25det neo motor (apparently 450cc) working fine, the motor had done 60 00kms. injectors also come with elec plugs attached and some wire hanging out to solder onto if you want to custom:)

injectors $250 or $400 for intake, rail and injectors

Aluminum twin wing black 1400mm long by 250mm wide $150

R32 random parts

Roll cage just the front section. suit a 2 door 32 without a sunroof $250

Cusco front camber arms. fixed 4 degrees of camber rubbers perfect condition $150

Rear camber arms standard $50

Stock black boot lid with standard spoiler. clear coat is starting to fade. $50

Air con. from fire wall forward all lines, compressor (off a neo motor) and brackets, condenser. working perfect before removal for de-weighting $200

Set of lowered Eibach spring and kyb shocks no oil leaks. Done less than 4000kms and shocks look like they have some sorta adjustment at the top $350

Koyo aluminum radiator one core is damaged leaking $100

4 rims similar looking to r33 rims and tyres, pcw 5 spoke 16x7 5x114. 2 tyres 50% and 2 60% $150

4 stock r33 rims and tyres 60% tread left on 2 and other on the wear line $250

Come with 6 spare 16 inch tyres:)

All parts located in Perth, postage can be arranged for some items at buyers expense

pm or 0434 313 923

can post pics of other parts if required

post-52148-1277725861_thumb.jpg

post-52148-1277725901_thumb.jpg

post-52148-1277725943_thumb.jpg

post-52148-1277729946_thumb.jpg

post-52148-1277730003_thumb.jpg

post-52148-1277730069_thumb.jpg

post-52148-1277730140_thumb.jpg

post-52148-1277730205_thumb.jpg

post-52148-1277730249_thumb.jpg

post-52148-1277730288_thumb.jpg

post-52148-1277730327_thumb.jpg

post-52148-1277730369_thumb.jpg

post-52148-1277730405_thumb.jpg

Yea those injectors should be 370cc.

Ok fair enough im not sure then cause i was told that they were 450cc but word of mouth always different. I'll give nissan a call. Anyway there out of a neo motor, blue in colour and for sale:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...