Jump to content
SAU Community

Eoi Trust Stainless Exhaust Manifold And Tial Gate Suit Gtr

ajohnston
 Share

Recommended Posts

ajohnston Enthusiast

ajohnston

Posted
Posted

thinking of changing my turbo setup so i might sell my trust highmount stainless manifold and tial wastegate with screamer suit rb26 currently on my r32 gtr with a t04z after around $900 ono for the manifold gate and screamer pipe both have done very few ks the manifold is still shiny like new hasnt gone black yet will also sell the dump to suit a t04z v band rear housing can easily be made to fit other housings after $100 for that email me [email protected] if your interested.

  • 1 month later...
  • 2 weeks later...
leekim Rookie

leekim

Posted
Posted
bump have a pic on my phone if anybodys interested email me your mobile number.

hi i'm very interested can you send me pic to my e mail [email protected]

  • 3 weeks later...
  • 2 weeks later...
johnbarry88 Grand Master

johnbarry88

Posted
Posted

mate where the hell is my manifold I paid for it over 2 weeks ago and still nothing. Let me know asap on how and when it was sent!

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...