Jump to content
SAU Community

Fs: Freshly Rebuilt, Forged Rb30det

Ryanoh
 Share

Recommended Posts

Ryanoh Rookie

Ryanoh

Posted
Posted (edited)

Nissan Rb30DET Forged Engine. Brand New

Asking: $12000

This Engine Has recently been fully rebuilt By "PLR engine reconditioning". I originally intended to use this engine and put it into an R31 skyline however I am joining the army at the end of the year and have simply run out of time to complete the project. So rather then have it sit around gathering dust I have decided to sell it. Any one who has priced these engines would be well aware that the asking price is far less then what I have paid to get it to this point. If I dont get around the price im looking for I will just keep it. Engine is Located on the Northside of brisbane

Make an offer

· Rb26 head which has Been fully Reconditioned by "PLR Engine Reconditioning"

· Block has been Bore and Honed, Decked and fully Balanced.

· Spool H Beam Forged Conrod's

· CP Forged Pistons

· ARP 12mm Head Studs (block drilled and tapped)

· ARP Mains Studs

· Spool Oil Drain Kit

· ACL main Bearings, ACL big end Bearings

· Cometic Head Gasket

· GATES Adjustable Timing Gears

· N1 Oil pump

· Top Mount Exhaust Manifold

RB30NissenEngine001.jpg

RB30NissenEngine004.jpgRB30NissenEngine003.jpgRB30NissenEngine002.jpgRB30NissenEngine006.jpg

Edited by Ryanoh
Link to comment
https://www.sau.com.au/forums/topic/327003-fs-freshly-rebuilt-forged-rb30det/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...