Jump to content
SAU Community

Recommended Posts

ok guys i need abit of help mainly places to start looking with my laurel which was having a few issues on Saturday at a drift day,

Car: nissan Laurel

Motor: series 2 RB25, ignitor on coil type

Mods: greddy copy plenum, tr43 turbo, split fire coils, AFM in cold pipe before throttle, extended wiring over engine bay , XF falcon throttle with tps sensor, mostly stripped wiring loom, Power FC computer

Problem, started off the when i'd throw the car in for a scando it would cut out for a second or so then accelerate again, thought it was the

fuel pump as it was very noisy (not a usual loud hum, sorta a gurgling type sound) so changed that out with brand new 040 and went back out on the track. car ran for about 6 or so laps fine then it started to cut out again but this time i would only have to start accelerating (putting load onto the engine about 3/4 throttle type thing). the cut out was like the car turned off, it didn't cough or splutter blow smoke or any of the usual suspects for like a blown cooler pipe or vacuum line. and the only length of silicon joiner is the 2inch 90degree bend coming off the turbo everywhere else is steel piping, bends etc and just short joiners. metal induction pipe and air filter a one of the drift type solid shape

So now i'm confused, first thought after the fuel pump was the ignitor but as these are on the coils on this motor it wouldn't cut out like it is i would have thought, next would be afm but before i start going over everything i just wanted to check if there may be another problem i could be overlooking.

any help would be appreciated, i've never had an issue like this before so i'm stuck

Im pretty sure similar thing happened to me on the weekend at the track. After a few runs suddenly sometimes as I downshifted to gear 2 and pumped it out of the corner its like the car just stopped and didnt do anything then let off the acclerator and pumped it again and it went, not sure what it was but yeah changed to spark plugs just for the sake of it hasnt done it again but then again it only did it a few times.

I was thinking aswel it could be a fuel pump issue but Ive got a nismo fuel pump so the mounting and all that shouldnt be an issue since its direct drop in and I had plenty of petrol, and it sort is like a missfire cuase it just stops the car and it like its stuck but yeah my plugs were pretty old so I guess it would be the cheapest thing to check first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...