Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Price drop $7000 ono for engine or offers for head/bottom end/inlet gear

$700 for injectors delivered

$400 for engine loom delivered

  • 2 weeks later...

Power FC D-Jetro sold

Ported RB26 head with 1inch oil drain $2200 ono

RB30 block and crank, Precision Rods, ARP rod bolts, ACL race bearings, ARIAS pistons, Tomei oil pump, Jun crank collar, 1mm head oil restriction, twin tensioner belt setup and Modified larger sump $5100 ono

GTR inlet gear (plenum, throttle bodies, injector manifold, attachments) $1200

6x SARD 800cc top feed injectors $700

Garrett T04z $1100 ono

Engine loom (modified, use to link R32 gts-t to a GTR aftermarket ecu) $350

Edited by =premo=

I was wondering if the Tomei Oil Pump will fit the RB26 and If your willing to trade the rear housing .84 for 1.00AR with some cash? let me know thanks

Would like to sell turbo as is because its a very good setup for medium to high power RB25's and bigger.

Tomei pump will fit all RB engines (RB30 requires a lug to be ground back on some blocks but its easy to do with a grinder)

  • 2 weeks later...

Turbo beanie wasn't in very good condition so I sold it with the Turbo kit but I do have another stainless heat shield I could sell for $50 But it requires two bolting points to be made and welded to the turbo dump.

Sorry I took the pics but forgot to upload them.

Shield will go free with turbo or listed with turbo on ebay if they haven't sold soon

post-16618-1286101049_thumb.jpg

post-16618-1286101113_thumb.jpg

post-16618-1286101168_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...