Jump to content
SAU Community

Can Someone Plz Plz Post A Closeup Pic Of R32gtst Cooler Piping In The Engine Bay


Recommended Posts

sorry i gave asked this before but could not get a good pic!

i have just brought the stock cooler piping and a new turn style cooler! there is one hole next to the intake of the air box but where is the other hole ( where does the other pipe go?)

sorry again just want to start putting the cooler together properly

sorry i gave asked this before but could not get a good pic!

i have just brought the stock cooler piping and a new turn style cooler! there is one hole next to the intake of the air box but where is the other hole ( where does the other pipe go?)

sorry again just want to start putting the cooler together properly

anyone??

Yeah both pipes are under the airbox. Also when you remove the stock cooler you will see both pipes off it go to under the airbox now simply install the cooler and the piping.

I don't get what you mean? Both holes are next to each other under the factory airbox. One pipe goes in, one pipe goes out. Just follow the pipes.

do you have a pic? I'm confused I only have one next to the airbox

Yeah both pipes are under the airbox. Also when you remove the stock cooler you will see both pipes off it go to under the airbox now simply install the cooler and the piping.

I already have a cooler but all the piping is a mess, so I brought the stock cooler piping and a new cooler but I have one hole next to the air box and one hole almost one infront of the intake of the stock airbox

not too sure what you are asking but they are the two pipes that my intercooler uses in the underneath shot you have. and the holes that those two pipes go in are the same ones my cooler uses

the setup is exactly the same as R33gtst and the pics you posted is how the standard pipes go. the bloke before you just used a shitload of joiners. ill check if i have pics.

Edited by SLY-25T

this is how the return flow piping is. couldnt find an engine bay pic but there is only really one way it can go. just see which pipe can go where to match up to the holes near the airbox.

photo066h.jpg

the pic added by skyline01999 shows the standard piping.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...