Jump to content
SAU Community

Recommended Posts

got a few items i dont need anymore

r32 boot spolier type s - $50 - gun metal gray colour. paint and condition is immaculate

posta275966wingfront.jpg

posta275967wingrear.jpg

autotecnica steering wheel - $10 - good condition just needs a bit of a wipe down.

posta275968steeringwhee.jpg

DRIFT boost gauge - $70ono - good condition - comes with holder and stand. - the third right one in the second picture.

posta275969gauge.jpg

posta275970gauge2.jpg

r32 lower control arms - 90ono for the pair - still in good condition as well as bushes. decided to get r33lca for more camber.

posta275971lca.jpg

autotecnica gearknob and handbreak cover - $10 for both - not warn out still looks brand spankin'

posta275972gearknob.jpg

posta275975handbreakcov.jpg

hicas bypass kit - $25firm - still in its packaging from justjap. brand new. save $20

posta275974hicasbypass.jpg

ALSO HAVE THE FOLLOWING ITEMS FOR SALE(pm me for pictures if needed).

r32 gtst turbo - $150ono - just took it off car 2 weeks ago as i updated. only about 2mm of shaft play still immaculate.

r32 front and dump pipe - 60ono - removed as went 3" all the way.

r32 SMIC - 60ono - still on car, just bought fmic.

r32 gtst stock springs front and rear - 70ono - still in good condition. can use them to clear rwc.

r32 boot carpet - 20ono

r32 caster rods - $10 for the pair. - slightly bent but still bolts in. useful if you need some asap for rolling shell.

r32 spare wheel - $10 - no use for it really

anything you might also want, i may have... pm me if interested in any items or others

cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...