Jump to content
SAU Community

Recommended Posts

  • 2 months later...

ok so its back up for sale again. basicly not interested in swaps unless its a track orientated car im interested in.

since it was last for sale it has had the whole pedders xa catalouge thrown at it. basicly that means

new coil over fronts

new pedders leaves

new pedders rear dampners

pedders front adjustable sway bar

whiteline rear sway bar

every rubber bush replaced with urethane bushes.

basicly $3500 plus fitting's worth of gear which has completely transformed the way it drives.

also have new factory seat skins to be fitted to the car upon sale as the drivers seat has a slight split in the seam where you slide in and out of the car which although repaired still isnt 100%

chasing $30,000 slightly neg or swap plus cash with track orientated car (ie. evo 7+, s15... that kinda thing)

cheers adam

Edited by drag-on silvia
$29500 Inc rwc. Still neg

Hi, I am from Melbourne.Currently have a lot of street/track, and track only GTR33 , 180SX and S15

Don't know much about holden and ford modified beast although my team mate at this years Phillip Island 6 hrs drove his XR6 turbo 4 door ( with roof rack!!) ap 6 PODS AND 4 PODS, hOOSIERS fully sorted and detuned for cercuit. He is only 3 sec slower than my S15.

Currently in my possession;

96 midnight purple GTR33 genuine 38xxxkm registered with whole lots of goodies,arrived from Japan with t88-34d 365kwaw,taken off for compliance. track tested with Garrett 2860-5 twin low mounts turbo ( Racepace job) 365kwaw.Now it has been re-engine with a low 40km stock GTR33 engine with N1 turbos 280kwaw to be sold for 29500.

95 white GTR33 with Jap build engine 310kwaw with the usual upgraded suspension,exhaust,etc track tested and ready 29500 with 100km service.complied but not registered

S15 298kw E85 with T518 turbo and all sorted out 1:52 testing at Phillip Island.going to PI this Sunday club sprint aiming to go down to 1:48 if track is dry.

180sx full on track car SR20 2.2 stroker TD06 20G 319kwaw waiting for a RB25 GTST 5 sp gear box conversion

GTR33 track only full on track car waiting for 400kwaw RB26, OS giken box etc.etc to go in next week.

Which one of these car do you like??

Alex 0433 878905

JAK Motorworks Campbellfield 3061

toy515... i hate you.

p.s. i love your car and i would in a heart beat. havin said that i am looking at racing superlap next year in what ever i build and im fairly sure the car / engine has to be homologated which rules out your car.

p.p.s. i was joking about the hate you part, i just would love your car but cant im sorry.

any other offers?

  • 5 months later...

so its bin a while. not really that keen on selling it anymore but thought id bump it up to test the water. specs again are

2006 BF1 xr6 turbo ute (7th month 2006 so comes with the stronger f6 typhoon bottom end)

performance

process west plenum

process west stage 2 intercooler

process west hot side cooler piping

process west surge tank with 044 pump

siemens deka 62lb injectors

nizpro valve springs

custom 4" cai

custom airbox with massive k&n pod

sonic performance teflon braided oil feed line with earls inline filter

garrett .7 compressor cover on the factory gt35r

etm external gate mod to factory exhaust housing

tial 44mm external gate (currently screamer but will plumb it back in for rwc)

x-force turbo back exhaust (4" dump, 5" cat, 3.5" catback)

battery relocated to the tray

wheels, brakes and suspension

G-max enigma 18x8.5 and 18x9.5 wrapped in 245/18 toyo tyres front and 265/18 kumho KU31 tyres rear

RDA GOLD slotted and dimpled front rotors running ebc greens

the whole pedders xa catalouge thrown at it. basicly that means

new coil over fronts

new pedders leaves

new pedders rear dampners

pedders front adjustable sway bar

whiteline rear sway bar

every rubber bush replaced with urethane bushes.

interior

pole position auto tripod gauge cluster

ppa elec boost gauge

ppa elec oil temp gauge

ppa elec oil pressure gauge

1kg fire extinguisher

ute also comes with the original sway bar and dash cover should you want to remove the gauges

and also brand new seat skins aswell

will come with rwc and 6 mts rego minimum

car is located in townsville fnq but is available for interstate buyers as their own cost

chasing $28,000 neg or swap for another vehicle or swap + cash adjust my way (really only looking for an evo7 or newer or a gtr)

any questions feel free to pm me or post up in the thread

cheers adam

Edited by drag-on silvia
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...